Panasonic PV GS320 Digital Video Camcor-english/spanish - Page 20
INSERTING/REMOVING A CASSETTE, When the cassette holder does not, come out, housed - cable
UPC - 037988980277
View all Panasonic PV GS320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Before using Inserting/removing a cassette 1 Fit the AC adaptor or the battery and turn on the power. 2 Slide the [OPEN/EJECT] lever and open the cassette cover. OPEN/ EJECT ≥When the cover is fully opened, the cassette holder will come out. 3 After the cassette holder is opened, insert/ remove the cassette. condensation may be formed on the heads or the cassette tape. (-72-) ª When the cassette holder does not come out ≥Close the cassette cover completely and then open it again completely. ≥Check if the battery has run down. ª When the cassette holder cannot be housed ≥Set the [OFF/ON] switch to [OFF], then to [ON] again. ≥Check if the battery has run down. ª Accidental erasure prevention If the accidental erasure prevention slider 1 of a cassette is opened (slide in the direction of the [SAVE] arrow), the cassette cannot be recorded. When recording, close the accidental erasure prevention slider of the cassette (slide in the direction of the [REC] arrow). 1 ≥When inserting a cassette, orient it as shown in the figure and then securely insert it as far as it goes. ≥When removing, pull it straight out. 4 Push the [PUSH] mark 1 in order to close the cassette holder. 1 PUSH ≥The cassette holder is housed. 5 Only after the cassette holder is completely housed, close the cassette cover tightly. ≥When inserting a previously recorded cassette, use the blank search function to find the position where you want to continue recording. If you are overwriting a previously recorded cassette, be sure to find the position where you want to continue recording. ≥When closing the cassette cover, do not get anything, such as a cable, caught in the cover. ≥After use, be sure to rewind the cassette completely, remove it and put it in a case. Store the case in an upright position. (-74-) ≥If the indicator of the condensation does not display on the LCD screen and/or EVF and you notice condensation on the lens or the main unit, do not open the cassette cover otherwise R E C SAVE Inserting/removing a card Before inserting/removing a card, set the [OFF/ ON] switch to [OFF]. ≥If the card is inserted or removed with the power turned on, this Camcorder may malfunction or the data recorded on the card may be lost. 1 Turn off the power 1. 1 OFF ON ≥Check that the Status indicator has gone off. 2 Open the card slot cover. 20 LSQT1091