Panasonic PV GS320 Digital Video Camcor-english/spanish - Page 73

About the battery, While carrying the Camcorder, do not drop or

Page 73 highlights

Others battery or reconnect AC adaptor and turn the Digital Video Camcorder on. Do not use the Digital Video Camcorder near radio transmitters or high-voltage lines. ≥If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may be adversely affected. Do not spray insecticides or volatile chemicals onto the Camcorder. ≥If the Camcorder is sprayed with such chemicals, the Camcorder body may become deformed and the surface finish may peel off. ≥Do not keep rubber or plastic products in contact with the Camcorder for a long time. When you use your Camcorder in a sandy or dusty place such as on a beach, do not let sand or fine dust get into the body and terminals of the Camcorder. Also, protect the Camcorder from getting wet. ≥Sand or dust may damage the Camcorder or cassette. (Care should be taken when inserting and removing a cassette.) ≥If sea water splashes onto the Camcorder, wet a soft cloth with tap water, wring it well and use it to wipe the Camcorder body carefully. Then, wipe it again thoroughly with a soft dry cloth. While carrying the Camcorder, do not drop or bump it. ≥A strong impact on the Camcorder may break its housing, causing it to malfunction. Do not use benzine, paint thinner or alcohol for cleaning the Camcorder. ≥Before cleaning, detach the battery or pull out the AC cable from the AC jack. ≥The Camcorder body may be discolored and the surface finish may peel off. ≥Wipe the Camcorder with a soft dry cloth to remove dust and fingerprints. To remove stubborn stains, wring well a cloth that is soaked in a neutral detergent diluted with water and wipe the Camcorder with it. Afterwards, wipe it with a dry cloth. ≥When you use a chemical dust cloth, follow the instructions. Do not use this Camcorder for surveillance purposes or other business use. ≥If you use the Camcorder for a long time, the internal temperature increases and, consequently, this may cause malfunction. ≥This Camcorder is not intended for business use. When you are not going to use Camcorder for an extended time ≥When storing the unit in a cupboard or a cabinet, it is recommended that you put a desiccant (silica gel) in with it. ª About the battery The battery used in the Camcorder is a rechargeable lithium ion battery. This battery is susceptible to temperature and humidity and the effect of temperature increases with increasing or decreasing temperature. In the low temperature range, the fully charged indication may not appear or the low battery indication may appear about 5 minutes after the start of use. At high temperature, moreover, the protection function may work, disabling use of the Camcorder. Be sure to detach the battery after use. ≥If the battery is left attached to the Camcorder, a minute amount of current is consumed even when the Camcorder power is [OFF]. If the battery is left attached to the Camcorder for a long time, over-discharge takes place. The battery may become unusable after it is charged. ≥The battery should be stored in a cool place free from humidity, with as constant temperature as possible. (Recommended temperature: 15 oC to 25 oC (59 oF to 77 oF), Recommended humidity: 40% to 60%) ≥Extremely high temperatures or low temperatures will shorten the life of the battery. ≥If the battery is kept in a high-temperature, highhumidity or oily-smoky places, the terminals may rust and cause malfunctions. ≥To store the battery for a long period of time, we recommend you charge it once every year and store it again after you have completely used up the charged capacity. ≥Dust and other matter attached to the battery terminals should be removed. Prepare spare batteries when going out for recording. ≥Charge batteries enough to last for 3 to 4 times the period during you want to record pictures in. In cold places such as a ski resort, the period during which you can record pictures is shortened. ≥When you travel, do not forget to bring an AC adaptor so that you can recharge the batteries at your destination. If you drop the battery accidentally, check to see if the terminals are deformed. ≥Attaching a deformed battery to the Camcorder or AC adaptor may damage the Camcorder or AC adaptor. Do not throw old battery into fire. ≥Heating a battery or throwing it into a fire may result in an explosion. If the operating time is very short even after the battery has been recharged, the battery has worn out. Please purchase a new battery. 73 LSQT1091

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

Others
73
LSQT1091
battery or reconnect AC adaptor and turn the
Digital Video Camcorder on.
Do not use the Digital Video Camcorder near
radio transmitters or high-voltage lines.
If you record near radio transmitters or
high-voltage lines, the recorded pictures and
sound may be adversely affected.
Do not spray insecticides or volatile
chemicals onto the Camcorder.
If the Camcorder is sprayed with such
chemicals, the Camcorder body may become
deformed and the surface finish may peel off.
Do not keep rubber or plastic products in
contact with the Camcorder for a long time.
When you use your Camcorder in a sandy or
dusty place such as on a beach, do not let
sand or fine dust get into the body and
terminals of the Camcorder. Also, protect the
Camcorder from getting wet.
Sand or dust may damage the Camcorder or
cassette. (Care should be taken when inserting
and removing a cassette.)
If sea water splashes onto the Camcorder, wet
a soft cloth with tap water, wring it well and use
it to wipe the Camcorder body carefully. Then,
wipe it again thoroughly with a soft dry cloth.
While carrying the Camcorder, do not drop or
bump it.
A strong impact on the Camcorder may break its
housing, causing it to malfunction.
Do not use benzine, paint thinner or alcohol
for cleaning the Camcorder.
Before cleaning, detach the battery or pull out
the AC cable from the AC jack.
The Camcorder body may be discolored and the
surface finish may peel off.
Wipe the Camcorder with a soft dry cloth to
remove dust and fingerprints. To remove
stubborn stains, wring well a cloth that is soaked
in a neutral detergent diluted with water and
wipe the Camcorder with it. Afterwards, wipe it
with a dry cloth.
When you use a chemical dust cloth, follow the
instructions.
Do not use this Camcorder for surveillance
purposes or other business use.
If you use the Camcorder for a long time, the
internal temperature increases and,
consequently, this may cause malfunction.
This Camcorder is not intended for business
use.
When you are not going to use Camcorder for
an extended time
When storing the unit in a cupboard or a
cabinet, it is recommended that you put a
desiccant (silica gel) in with it.
ª
About the battery
The battery used in the Camcorder is a
rechargeable lithium ion battery. This battery is
susceptible to temperature and humidity and the
effect of temperature increases with increasing or
decreasing temperature. In the low temperature
range, the fully charged indication may not
appear or the low battery indication may appear
about 5 minutes after the start of use. At high
temperature, moreover, the protection function
may work, disabling use of the Camcorder.
Be sure to detach the battery after use.
If the battery is left attached to the Camcorder, a
minute amount of current is consumed even
when the Camcorder power is [OFF]. If the
battery is left attached to the Camcorder for a
long time, over-discharge takes place. The
battery may become unusable after it is
charged.
The battery should be stored in a cool place free
from humidity, with as constant temperature as
possible. (Recommended temperature: 15
o
C to
25
o
C (59
o
F to 77
o
F), Recommended humidity:
40% to 60%)
Extremely high temperatures or low
temperatures will shorten the life of the battery.
If the battery is kept in a high-temperature, high-
humidity or oily-smoky places, the terminals
may rust and cause malfunctions.
To store the battery for a long period of time, we
recommend you charge it once every year and
store it again after you have completely used up
the charged capacity.
Dust and other matter attached to the battery
terminals should be removed.
Prepare spare batteries when going out for
recording.
Charge batteries enough to last for 3 to 4 times
the period during you want to record pictures in.
In cold places such as a ski resort, the period
during which you can record pictures is
shortened.
When you travel, do not forget to bring an AC
adaptor so that you can recharge the batteries
at your destination.
If you drop the battery accidentally, check to
see if the terminals are deformed.
Attaching a deformed battery to the Camcorder
or AC adaptor may damage the Camcorder or
AC adaptor.
Do not throw old battery into fire.
Heating a battery or throwing it into a fire may
result in an explosion.
If the operating time is very short even after
the battery has been recharged, the battery
has worn out. Please purchase a new battery.