Panasonic PV-L454 Vhs-c Camcorder - Page 11
Supplying Power
UPC - 037988977505
View all Panasonic PV-L454 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Supplying Power Getting Started Battery Care CAUTION • Do not place the Battery near or dispose of in fire. • Do not connect (short-circuit) the positive (+) and negative (-) terminals. • Never attempt to disassemble or reassemble the Battery. • Do not drop or jar Battery. • Use Battery with specified units only. • Charge only with specified charger. • Do not use an insufficiently charged or worn-out Battery. • Battery can be charged within a temperature range of 10 °C (50 °F) and 35 °C (95 °F). • Battery is normally warm after charging or just after use. Battery Life and Protection • If Battery is used in extremely high temperatures, a safety device will automatically prevent operation. • While not in use, remove Battery from the Camcorder and AC Adaptor, and store in a cool, dark, dry place. • Keep Battery terminals clean. AC Adaptor 1 Connect AC Adaptor DC OUT to Camcorder DC IN with supplied DC DC Power Cable Power Cable. 2 Plug in AC Adaptor. POWER Lamp POWER Lamp lights. Note: DC IN • While the DC Power Cable (supplied) is Connector connected to the AC Adaptor, the Battery cannot be charged. • When not in use, unplug AC Adaptor from DC OUT Connector AC outlet. (Adaptor uses 1.2 W of electricity while plugged in.) CAUTION This unit will operate on 110/120/220/240 V AC 50/60 Hz. An AC plug adaptor may be required for voltages other than 120 V AC. Please contact either a local or foreign electrical parts distributor for assistance in selecting an alternate AC plug. We recommend using the accessory power plug adaptor (VJSS0070/ K2DB42E00001) in an area which has special AC outlets. Car Battery Cord (Optional) DC IN Connector Cigarette Lighter Socket (12 V) Car Battery Cord (optional) Cigarette Lighter Plug 1 Connect PV-C16 Car Battery Cord (optional) to Camcorder DC IN. 2 A Start engine first. B Plug Car Battery Cord into Cigarette lighter socket. • If Car Battery cord fuse needs replacing, use exact current rating (in amps). Note: • This cord only works in vehicles equipped with DC 12 V (negative ground) battery. Check with your car/truck dealer. Use only specified car battery cord. • To avoid blowing the car battery cord fuse, do step 2 in the proper order. • Running vehicles must be well ventilated. • When not in use, disconnect cigarette lighter plug. • For personal safety the driver of the vehicle should not attempt to operate the camcorder while driving. 11