Panasonic PV-L454 Vhs-c Camcorder - Page 17
Accubrite Built-in Light
UPC - 037988977505
View all Panasonic PV-L454 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
AccuBrite™ Built-in Light Getting Started Using the Light For recording in dim lighting. 1, 2 3 Note: • Using Light reduces battery operating time. • Provide proper ventilation when using Light extensively in a hot environment. • Using Light when the Camcorder is powered by a car battery may shorten bulb life. • Set Light to OFF when not in use. • When Camcorder is in CAMERA Rec mode with LIGHT MODE set to ON or AUTO, changing to VCR Play mode will cause the light to go out and the menu setting will revert to OFF. When returning to CAMERA Rec mode, the LIGHT MODE must be set again. Replacing the Bulb B 1 A 2 3 Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA. 1 Press MENU for MENU mode. Press UP or DOWN to select LIGHT MODE . 2 Press M.FOCUS to set OFF/ON or OFF/ON/AUTO. Press MENU to exit. 3 Press LIGHT repeatedly for Light ON, AUTO, or OFF. • In AUTO, light turns itself on/off according to lighting conditions. EVF or LCD Monitor A : Light is on. A : Light mode is auto. CAUTION This mark indicates that light becomes hot. Never cover Light while on. Before you begin... • Order Part No. VLLW0015 for replacement bulb. • Set POWER to OFF. 1 Slightly raise portion A of lens cover to unhook, and slide portion B forward to remove. 2 Using Tweezers or needle-nose pliers, carefully remove bulb. • Take unit to service center if you need assistance. 3 Replace bulb using a clean cloth or tissue. (Do not touch with fingers.) 4 Replace lens cover. Note: • Handle bulb gently. Excessive force may DANGER: cause bulb to crack. Use only replacement bulb (PART NO. VLLW0015) supplied by Panasonic to reduce risk of fire. Handle new bulb with cloth or tissue as skin oils will decrease bulb life. Remove lens cover and allow bulb to cool before replacing to avoid possible burn hazard. 17