Panasonic PVD4743 PVD4743 User Guide - Page 48

Settings for DVD Operation (continued) Audio Output Ready Checklist Select the digital output to be output from the optical digital audio output connector of DECK. DECK is in DVD mode, press DVD. 1 Press ACTION* to display DVD MAIN MENU. 2 DVD MAIN MENU DISC LANGUAGES AUDIO OUTPUT ST I L L MODE : AUTO TV MODE : 4:3 Letterbox PARENTAL LOCK :LEVEL 8 SELECT SET END : : SET : ACTION Press to select "AUDIO OUTPUT," and press SET to display screen. Type of amplifier to be connected Recommended setting LPCM Dolby (DVD) Digital DTS No amplifier is connected AV amplifier (with digital audio input connector) without Dolby Digital/DTS PCM decoder PCM*1 PCM*1 AV amplifier including Dolby Digital decoder PCM Bitstream PCM 3 AUDIO OUTPUT LPCM(DVD) Dolby Digital dts DRC : OFF : Bitstream : Bitstream : OFF SELECT SET END : : SET : ACTION Press to select an item, and press SET repeatedly for output. (See below.) AV amplifier including Dolby Digital/DTS decoder PCM Bitstream Bitstrea*m2 • Make settings according to amplifier connected to optical audio output as shown in above table. *1 When connecting an amplifier (with an optical digital input connector) which does I "LPCM (DVD)" selections OFF: Linear PCM of less than 48 kHz/16 bit is output. When playing DVDs recorded in linear PCM of over 48 kHz/20 bit, no digital audio is output. (Factory preset) PCM: When playing DVDs recorded in linear PCM of not contain the Dolby Digital or DTS decoder, be sure to select "PCM". If "Bitstream" is selected, starting DVD play may cause such a high level of noise as to be harmful to your ears and damage the speakers. 48 kHz/20 bit/24 bit or more, digital audio *2 When a DTS decoder is connected, please converted to 44.1 kHz/16 bit or 48 kHz/16 bit is select "Bitstream" in "dts". output. (Digital output of PCM audio is restricted to 48 kHz/16 bit or below for copyright protection.) I "Dolby Digital" selections Bitstream: Dolby Digital bitstream (1ch-5.1ch) is output. (Factory preset) PCM: When you have connected a amplifier that doesn't have a built-in Dolby Digital decoder. I "dts" selections Bitstream: DTS bitstream is output. (Factory preset) PCM: When you have connected a amplifier that doesn't have a built-in DTS decoder. I "DRC (Dynamic Range Compression)" selections OFF: Normal audio range is selected. (Factory preset) ON: For dynamic sound even at low volume, this is useful for late-night listening. [Dolby Digital DVDs only]. 4 Press ACTION to redisplay DVD MAIN MENU and go to step 2 to setup another item. Or, press ACTION twice to exit. 48 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]