Panasonic PVDV53 PVDV53 User Guide - Page 26

Adjusting the Iris Manually, Set POWER to CAMERA., Hold down AUTO/MANUAL for more, than 0.7 second

Page 26 highlights

Advanced Settings Adjusting the Iris Manually Normally, the Palmcorder adjusts the exposure automatically. However, when the background is extremely bright, or when the subject is backlit, you can compensate by adjusting the Iris manually. 3, 4 JOG KEY 1POWER 2AUTO/MANUAL EVF/LCD Iris Setting 1 Set POWER to CAMERA. 2 Hold down AUTO/MANUAL for more than 0.7 second so that the "MNL" indication appears in the EVF or the LCD monitor. 3 Press JOG KEY repeatedly so that Iris setting indication appears in the EVF or the LCD monitor. 4 Rotate JOG KEY to adjust the iris; • When a value closer to "CLOSE" is selected, the image becomes darker. • When a value closer to "OP+18dB" is selected, the image becomes brighter. • Hold down AUTO/MANUAL for more than 0.7 second to cancel the setting. Note • The value to which +dB is attached indicates a gain value. If this value is too large, the quality of the image deteriorates. • Depending on ZOOM magnification, the iris value may not be displayed correctly. • If you are using Program AE mode, you cannot adjust the iris. If the iris is adjusted manually, the above modes will be canceled. 26 Forassistance, pleasecall: 1-800-211-PANA(7262)orsende-mailto:[email protected]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

26
For assistance,
please call :
1-800-211-PANA(7262) or send e-mail to : [email protected]
Advanced Settings
Adjusting the Iris Manually
Normally, the Palmcorder adjusts the
exposure automatically. However, when
the background is extremely bright, or
when the subject is backlit, you can
compensate by adjusting the Iris manually.
1
Set POWER to CAMERA.
2
Hold down AUTO/MANUAL for more
than 0.7 second
so that the
MNL
indication appears in the EVF or the
LCD monitor.
3
Press JOG KEY repeatedly
so that
Iris setting indication appears in the
EVF or the LCD monitor.
4
Rotate JOG KEY
to adjust the iris;
When a value closer to
CLOSE
is
selected, the image becomes darker.
When a value closer to
OP+18dB
is
selected, the image becomes
brighter.
Hold down AUTO/MANUAL for more
than 0.7 second to cancel the
setting.
The value to which +dB is attached
indicates a gain value. If this value is too
large, the quality of the image
deteriorates.
Depending on ZOOM magnification, the
iris value may not be displayed correctly.
If you are using Program AE mode, you
cannot adjust the iris. If the iris is adjusted
manually, the above modes will be
canceled.
Note
3, 4
JOG KEY
1
POWER
Iris
Setting
2
AUTO/MANUAL
EVF/LCD