Panasonic PVL453D PVL453 User Guide - Page 40

Digital Still Camera Digital Wipe Mode Insert a captured still image into the current recording, or vice versa, in one of three wipe effects. 2 4 MODE START 3 Before you begin... • Connect Camcorder to power source. • Insert the Memory Card (optional, page 34). • Set POWER to CAMERA. 1 Repeat steps 1-4 on page 39 to set Picture in Picture Wipe title. 2 Press (MODE) repeatedly for Wipe effect 1, 2, or 3 (See left). • WIPE 1 will flash for a while to store the image for the wipe. 3 Start recording (page 17). 4 Press (START) : once © inserts captured image. twice © inserts current recording picture. • You can freeze the wipe in progress by pressing (START). Press (START) again to resume wipe. Note: • If Memory Card is not inserted, "NO CARD" appears on-screen. Set Power to OFF, then insert the Memory Card. • Pictures captured with other brand products cannot be used with this Camcorder. • If "INCOMPATIBLE IMAGE" appears onscreen, the size of the captured image cannot be played back on this Camcorder. • If "CARD ERROR" appears on-screen, see page 56. • If Digital Wipe mode is selected, the following functions are not available: MotionSensor, Auto Fade, Digital Fade, Color Digital Filter, Digital Zoom, Digital E.I.S., Still/Strobe/Wide. 40 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]