Panasonic SAAK340 SAAK240 User Guide - Page 12

ENGLISH DANSK FRANÇAIS Radio Numeric buttons FM allocation setting By main unit only This system can also receive FM broadcasts allocated in 0.1 MHz steps. To change the step to 0.1 MHz 1 Press and hold [TUNER, BAND]. After a few seconds the display changes to a flashing display of the current minimum frequency. 2 Continue to hold down [TUNER, BAND]. • When the minimum frequency changes, release the button. To return to the original step, repeat the above steps. • After changing the setting, previously preset frequency will be cleared. Memory preset Up to 15 stations each can be set in the FM and AM bands. Preparation Press [TUNER, BAND] to select "FM" or "AM". Automatic presetting Manual tuning 1 Press [TUNER, BAND] to select "FM" or "AM". 2 Press [PLAY MODE] to select "MANUAL". 3 Press [4, REW / ] or [¢, / FF] to select the frequency of the required station. • " " is displayed when a stereo FM broadcast is being received. • "TUNED" is displayed when a radio station is tuned. To tune automatically Press and hold [4, REW / ] or [¢, / FF] until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station. • Auto tuning may be interrupted when there is excessive interference. • To cancel auto tuning, press [4, REW / ] or [¢, / FF] once again. To improve FM sound quality Press and hold [PLAY MODE] to display "MONO". To cancel Press and hold [PLAY MODE] again until "MONO" disappear. • MONO is also canceled if the frequency is changed. • Turn off "MONO" for normal listening. 1 Tune to the frequency where pre-setting is to begin. 2 Press and hold [PROGRAM] to start presetting. The tuner presets all the stations it can receive into the channels in ascending order. When finished, the last station memorized is tuned in. Manual presetting 1 Press [PLAY MODE] to select "MANUAL". 2 Press [4, REW / ] or [¢, / FF] to tune to the required station. 3 Press [PROGRAM]. 4 Press the numeric buttons to select a channel. For channels 10 to 15 press [h10], then the two digits. The station occupying a channel is erased if another station is preset in that channel. Selecting a preset station Press the numeric buttons to select the channel. OR 1 Press [PLAY MODE] to select "PRESET". 2 Press [4, REW / ] or [¢, / FF] to select the channel. LANG - 4 LANG - 5 RQTV0061 12 RQT8043