Panasonic SAAK340 SAAK240 User Guide - Page 13

ENGLISH DANSK Timer Setting the clock 4 Repeat steps 2 to 3 to set the finishing time. This is a 12-hour clock. 1 Press [CLOCK/TIMER] to select "CLOCK". Each time you press the button: CLOCK ➞ ˚ PLAY ➞ ˚ REC Original display Finish time 2 ( Within 8 seconds or so ) Press [4, REW / ] or [¢, / FF] to set the time. 3 Press [CLOCK/TIMER] to finish setting the time. Displaying the clock Press [CLOCK/TIMER] once when the unit is on or in standby mode. The time is displayed for a few seconds. Note: Reset the clock regularly to maintain accuracy. To activate the timer 5 Press and hold [- ˚PLAY/REC] to turn on your desired timer. ˚ PLAY ➞ ˚ REC no display (off) 6 Press [y] to turn off the unit. The unit must be off for the timers to operate. Other basic operations Using the play or record timer You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or music port source (record timer). Play timer and record timer cannot be used together. Turn the unit on and set the clock. Timer Play timer Action Prepare the music source you want to listen to; cassette (DECK 2 has the priority), disc number (1~5), radio or music port source, and set the volume. Record timer Check the cassette's erasure prevention tabs (\ page 11), insert the cassette in DECK 2 and tune to the radio station (\ page 12) or select the music port source (\ page 15). 1 Press [CLOCK/TIMER] to select the timer function Each time you press the button: CLOCK ➞ ˚ PLAY ➞ ˚ REC Original display ˚PLAY : to set the play timer ˚REC : to set the record timer (Proceed to the next step within 8 seconds ) 2 Press [4, REW / ] or [¢, / FF] to set the starting time. Play timer indicator To change the settings change the source or volume check the settings cancel Action Repeat steps 1 to 4 and 6 (\ see left and above). 1) Press and hold [- ˚PLAY/REC] to clear the timer indicator from the display. 2) Make changes to the source or volume. 3) Do steps 5 to 6 (\ see above). Press [CLOCK/TIMER] repeatedly to select ˚PLAY or ˚REC. Press and hold [- ˚PLAY/REC] to clear the timer indicators from the display. If you use the unit after the timers are set After using, check that the correct tape/disc are loaded before turning the unit off. Note: • The play timer will start at the preset time with volume increasing gradually to preset level. • The record timer will start 30 seconds before the set time with the volume muted. • The timer comes on at the set time everyday if the timer is on. • The unit must be in the standby mode for the timer to function. • If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated. • If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to playback or record from the portable audio equipment, just activate the equipment's play mode and increase the volume. (See the portable audio equipment's instruction manual.) Start time Record timer indicator 3 Press [CLOCK/TIMER] to confirm. FRANÇAIS LANG - 4 LANG - 5 RQTV0061 13 RQT8043