Panasonic SAPM47 SAPM47 User Guide - Page 19

Listening operations /REW/ , / FF/ 1c OPEN 2 TAPE 3 VOLUME DOWN UP OPEN 1 DEMO 2 3 B Insert inside the guides Forward side Cassette tapes 1 Press [c OPEN], insert a cassette with the tape facing in. When the button is pressed, the unit comes on automatically. Make sure the cassette is fully inserted and close the lid by hand. 2 Press [3 TAPE ] to start playback. 3 Adjust the volume. To stop tape playback Press [L/-DEMO]. One-touch play When the system is OFF and a cassette is already inserted, play starts automatically when you press [3 TAPE]. Fast-forward and rewind Press [4/REW/ g] (rewind) or [3 /FF/f] (fast-forward) in the stop mode. Cassette tape selection and care Types of tapes which can be played correctly. The system automatically identifies the type of tape. NORMAL POSITION/TYPE I  HIGH POSITION/TYPE II ✕ METAL POSITION/TYPE IV ✕ High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics of these tapes. • Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. • Tape slack can get caught up in the mechanism and should be wound up before the tape is played. • Endless tapes can get caught up in the deck's moving parts if used incorrectly. Always read the instructions provided with your tapes. To find the beginning of a program (TPS: Tape Program Sensor) TPS finds the beginning of a track and resumes play from there. Each press increases the number of tracks skipped, up to a maximum of 9. Press [4/REW/ g] or [3 /FF/f] during play. Notes The TPS function searches for silent parts of about 4 seconds in length which are normally found between tunes. As a result, it may not function properly in the following cases: • With short silent parts • When noise occurs between tunes • With silent parts found within tunes 19 RQT6530