Panasonic SC-AKX18 SC-AKX18 Owner's Manual (Multi Language) - Page 16

Specifications, Amplifier Tuner, terminals Disc Bluetooth, - cd stereo system

Page 16 highlights

Specifications █ Amplifier section █ USB section RMS output power stereo mode Front Ch (both ch driven) 175 W per channel (4 Ω), 1 kHz, 30% THD Total RMS stereo mode power 350 W (30% THD) FTC output power stereo mode Front Ch (both ch driven) 80 W per channel (4 Ω), 50 Hz to 20 kHz, 1% THD Total FTC stereo mode power 160 W █ Tuner, terminals section Preset memory FM 30 stations Frequency modulation (FM) Frequency range 87.9 MHz to 107.9 MHz (200 kHz step) 87.5 MHz to 108.0 MHz (100 kHz step) Antenna terminals 75 Ω (unbalanced) Analog audio input Pin jack (1 system) █ Disc section Disc played [8 cm (3″) or 12 cm (5″)] CD, CD-R/RW (CD-DA, MP3 ) Pick up Wavelength 790 nm (CD) MPEG-1 Layer 3 █ Bluetooth® section USB port USB standard Media file format support USB device file system USB port power USB 2.0 full speed MP3 (*.mp3) FAT12, FAT16, FAT32 500 mA (max) █ Speaker section Speaker unit(s) Woofer Tweeter Impedance Dimensions (W x H x D) Mass (Weight) 16 cm (6 ½″) cone type 6 cm (2 ⅜″) cone type 4 Ω 200 mm x 334 mm x 233 mm (7 ¾″ x 13 ¼″ x 9 ¼″) 3 kg (6.6 lbs) █ General Power supply AC 120 V, 60 Hz Power consumption 50 W Dimensions (W x H x D) 230 mm x 335 mm x 243 mm (9 ¼″ x 13 ¼″ x 9 ¾″) Mass (Weight) 2.7 kg (6 lbs) Operating temperature range 0°C to +40°C (+32°F to +104°F) Operating humidity range 35% to 80% RH (no condensation) Version Class Supported profiles Operating frequency Operation distance Bluetooth® Ver. 2.1 + EDR Class 2 A2DP, AVRCP, SPP 2.4 GHz band, FH-SS 10 m (33 ft) line of sight Power consumption in standby mode 0.4 W (approximate) Power consumption in standby mode (With "BLUETOOTH STANDBY" set to "ON") 0.5 W (approximate) Note: • Specifications are subject to change without notice. Mass (weight) and dimensions are approximate. • Total harmonic distortion is measured by the digital spectrum analyzer. RQT9899 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

16
RQT9899
Specifications
Amplifier section
RMS output power stereo mode
Front Ch (both ch driven)
175 W per channel (4
), 1 kHz, 30% THD
Total RMS stereo mode power
350 W (30% THD)
FTC output power stereo mode
Front Ch (both ch driven)
80 W per channel (4
), 50 Hz to 20 kHz, 1% THD
Total FTC stereo mode power
160 W
Tuner, terminals section
Preset memory
FM 30 stations
Frequency modulation (FM)
Frequency range
87.9 MHz to 107.9 MHz (200 kHz step)
87.5 MHz to 108.0 MHz (100 kHz step)
Antenna terminals
75
(unbalanced)
Analog audio input
Pin jack (1 system)
Disc section
Disc played [8 cm (3
) or 12 cm (5
)]
CD, CD-R/RW (CD-DA, MP3
)
Pick up
Wavelength
790 nm (CD)
MPEG-1 Layer 3
Bluetooth
®
section
Version
Bluetooth
®
Ver. 2.1 + EDR
Class
Class 2
Supported profiles
A2DP, AVRCP, SPP
Operating frequency
2.4 GHz band, FH-SS
Operation distance
10 m (33 ft) line of sight
USB section
USB port
USB standard
USB 2.0 full speed
Media file format support
MP3 (
*
.mp3)
USB device file system
FAT12, FAT16, FAT32
USB port power
500 mA (max)
Speaker section
Speaker unit(s)
Woofer
16 cm (6
½
) cone type
Tweeter
6 cm (2
⅜″
) cone type
Impedance
4
Dimensions (W x H x D)
200 mm x 334 mm x 233 mm
(7
¾
x 13
¼
x 9
¼
)
Mass (Weight)
3 k
g
(6.6 lbs)
General
Power supply
AC 120 V, 60 Hz
Power consumption
50 W
Dimensions (W x H x D)
230 mm x 335 mm x 243 mm
(9
¼
x 13
¼
x 9
¾
)
Mass (Weight)
2.7 k
g
(6 lbs)
Operating temperature range
0°C to +40°C
(+32°F to +104°F)
Operating humidity range
35% to 80% RH (no condensation)
Note:
Specifications are subject to change without notice.
Mass (weight) and dimensions are approximate.
Total harmonic distortion is measured by the digital
spectrum analyzer.
Power consumption in standby mode
0.4 W (approximate)
Power consumption in standby mode
(With “BLUETOOTH STANDBY” set to “ON”)
0.5 W (approximate)