Panasonic SC-PMX150 Owners Manual - Page 12

TQBJ0996 Bluetooth® input level If the sound input level from the Bluetooth® device is too low, change the input level setting. Preparation • Connect a Bluetooth® device. 1 Press [PLAY MENU] repeatedly to select "Input Level". 2 Press [2, 1] to select the level and then press [OK]. "Level 0" ,. "Level i1" ,. "Level i2 J Note: • Select "Level 0" if the sound is distorted. • The factory default is "Level 0". Disconnecting a Bluetooth® device 1 While a Bluetooth® device is connected: Press [PLAY MENU] repeatedly to select "Disconnect?". 2 Press [2, 1] to select "OK? Yes" and then press [OK]. Note: • You can also disconnect the Bluetooth® device by pressing and holding [ -PAIRING] on the unit. • The Bluetooth® device will be disconnected if a different audio source (e.g., "CD") is selected. Bluetooth® standby When "SC-PMX150" is selected from a paired Bluetooth® device's Bluetooth® menu, this unit will turn on automatically from standby mode and establish a Bluetooth® connection. 1 Press [SETUP] repeatedly to select "BLUETOOTH Standby". 2 Press [2, 1] to select "On" and then press [OK]. Note: • To turn the function off, select "Off" in step 2. • The factory default is "Off". If this function is set to "On", the standby power consumption will increase. 12 Media information • Please be aware that Panasonic accepts no responsibility for the loss of data and/or information. Compatible iPhone/iPad/iPod iPhone 7 Plus / iPhone 7 / iPhone SE / iPhone 6s Plus / iPhone 6s / iPhone 6 Plus / iPhone 6 / iPhone 5s / iPhone 5c / iPhone 5 / iPhone 4s iPad Pro (9.7-inch and 12.9-inch) / iPad Air 2 / iPad Air / iPad (3rd and 4th generation) / iPad 2 / iPad mini 4 / iPad mini 3 / iPad mini 2 (iPad mini with Retina display) / iPad mini iPod touch (5th and 6th generation) iPod nano (7th generation) (as of March 2017) • For the latest information, visit http://panasonic.jp/support/global/cs/audio/ (This site is in English only.) Note: • Do not connect models not listed in the above. Unexpected behaviour may occur. • Compatibility depends on the software version. Update your iPhone/iPad/iPod to the latest software before using it with this unit. • Read the User Guide of the iPhone/iPad/iPod for the operating instructions. Compatible USB devices • This unit does not guarantee connection with all USB devices. • FAT12, FAT16 and FAT32 file systems are supported. • This unit supports USB 2.0 High Speed. • USB devices with storage capacity of more than 32 GB cannot work in some conditions. • Supported file formats and extensions: MP3 (".mp3"), AIFF (".aiff"), FLAC (".flac"), WAV (".wav"), AAC (".m4a"), DSD (".dff", ".dsf") • Depending on how you create the files, they may not play in the order you numbered them or may not play at all. Note: • Files are defined as tracks and folders are defined as albums. • This system can access up to: - 800 albums (including root folder) - 8000 tracks - 999 tracks in one album Compatible CD • This system can play back discs that conform to the CD-DA format. • This system can play back CD-R/RW with CD-DA or MP3 format content. • The unit may not be able to play some discs due to the condition of the recording. • Before playback, finalize the disc on the device it was recorded on. • If the disc includes both MP3 and normal audio data (CD-DA), the unit plays the type recorded in the inner part of the disc. • This unit cannot play files recorded using packet write. • Disc must conform to ISO9660 level 1 or 2 (except for extended formats). Note: • Some CD-R/RW cannot be played because of the condition of the recording. • MP3 files are defined as tracks and folders are defined as albums. • This system can access up to: - CD-DA: 99 tracks - MP3: 999 tracks, 255 albums (including root folder) • Recordings will not necessarily be played in the order you recorded them. Inserting media CD Label facing up OPEN/CLOSE OPEN/CLOSE Press [CD/USB] repeatedly to select "CD".