Panasonic SCPM29 SAPM29 User Guide - Page 26
Reference, Specifications, When Moving The Unit, Maintenance, Product Service, Remove All Discs.
View all Panasonic SCPM29 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Specifications g AMPLIFIER SECTION RMS Power output 10% Total harmonic distortion 1 kHz, both channels driven (Low channel) 35 W per channel (6 Ω) 8 kHz, both channels driven (High channel) 35 W per channel (6 Ω) Total Bi-Amp power 70 W per channel Input sensitivity AUX 250 mV Input Impedance AUX 11.8 kΩ g FM TUNER SECTION Frequency range 87.9 - 107.9 MHz Sensitivity 1.8 µV (IHF) S/N 26 dB 1.5 µV Antenna terminal(s) 75 Ω (unbalanced) g AM TUNER SECTION Frequency range 530 - 1710 kHz Sensitivity S/N 26 dB (at 999 Hz) 560 µV\m g CASSETTE DECK SECTION Track system 4 track, 2 channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erasing system AC erase 100 kHz Tape speed 4.8 cm/s Overall frequency response (+3 dB, -6 dB at DECK OUT) NORMAL (TYPE I) 35 Hz - 14 kHz S/N 50 dB (A weighted) Wow and flutter 0.18% (WRMS) Fast forward and rewind time Approx. 120 seconds with g CD SECTION C-60 cassette tape Disc played CD/MP3/WMA 8cm/12cm, CD-R/RW Sampling frequency Decoding Pickup 44.1 kHz 16 bit linear Beam source/wavelength Semiconductor laser/780 nm Number of channels Stereo Frequency response 20 Hz - 20 kHz (+1, -2 dB) Wow and flutter Below measurable limit Digital filter 8 fs D/A converter MASH (1 bit DAC) MP3 Bit rate 32 kbps - 320 kbps Sampling frequency 32 kHz, 44.1 kHz, 48 kHz WMA Sampling frequency 32kHz, 44.1kHz, 48kHz g SPEAKER SECTION Type 2 way 2 speaker system Speaker(s) Woofer 10 cm cone type Tweeter 6 cm cone type Impedance HIGH 6 Ω LOW 6 Ω Input power HIGH 70 W (Music) LOW 70 W (Music) Output sound pressure level 80 dB/W (1.0 m) Cross over frequency 3.5 kHz Frequency range 55 Hz - 31 kHz (-16 dB) 75 Hz - 26 kHz (-10 dB) Dimensions (W x H x D) 155 x 250 x 258 mm Mass 2.3 kg g GENERAL Power supply AC 120 V, 60 Hz) Power consumption 130 W Dimensions (W x H x D) 179 x 247 x 378 mm Mass 5.4 kg Power consumption in standby mode: Approx. 0.6 W Note 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. 3. The labels "HIGH (HF)" and "LOW (LF)" on the rear of the speakers refer to High frequency and Low frequency. When moving the unit 1. Remove all discs. 2. Press [8] to turn the unit off. 3. Disconnect the AC mains lead. Maintenance For a cleaner crisper sound Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included). If the surfaces are dirty To clean this unit, wipe with a soft, dry cloth. l Never use alcohol, paint thinner or benzine to clean this unit. l Before using chemically treated cloth, read the instructions that came with the cloth carefully. This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone. Product Service RQT7372 1. Damage requiring service - The unit should be serviced by qualified service personnel if: (a) The AC power supply cord or the plug has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. Servicing - Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. 3. Replacement parts - When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 4. Safety check - After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. The servicer will require all components to service your system. Therefore, should service ever be necessary, be sure to bring the entire system. 26 Product information For product information or assistance with product operation: In the U.S.A., refer to "Customer Services Directory" on page 27. For assistance in the continental U.S.A in obtaining repairs please ship the product to: Panasonic Services Company - Customer Servicenter Suite B 4900 George McVay Drive, MacAllen, TX 78503 In Puerto Rico contact the Panasonic Sales Company. Tel. (787) 750-4300 Fax. (787) 768-2910 When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/ PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Also, the purchaser will be responsible for shipping the unit to the above address. In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or visit website (www.panasonic.ca), or an authorized Servicentre closest to you.