Panasonic SCPM29 SAPM29 User Guide - Page 5

Connections l Plug the AC power supply cord into a household AC 21 outlet only after all other connections have been made. l To prepare the AM loop antenna wire and speaker (L) cords, twist the vinyl cover tip and pull off. (R) 3 To household AC outlet 4 (AC 120 V / 60 Hz) 1 Adhesive tape AM ANT FM ANT FM indoor antenna (included) EXT 2 75 LOOP AM ANT 1 FM ANT LOOP 75 EXT 2 3B Grey Black Blue Red HIGH (6 ) 1 3 L R 2 LOW (6 ) 4 A Red Black Blue White 1 Connect the FM indoor antenna. Tape the antenna to a wall or column, in a position where radio signals are received with the least amount of interference. For the best reception: An FM outdoor antenna is recommended. (è page 7) 2 Connect the AM loop antenna. Stand the antenna up on its base. Keep loose antenna cord away from other wires and cords. 3 Connect the speaker cables. A Confirm the colors of the tags on the ends of the cords. B For White tags: Connect cords to grey terminals. For Blue, Black and Red tags: Connect cords so tag colors match the terminal colors. Cords with white and blue tags are for high frequency. Cords with red and black tags are for low frequency. Incorrect connection can damage the unit. Caution Use only the supplied speakers. The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected. Caution l Use the speakers only with the recommended system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. l Do not attach these speakers to walls or ceilings. 4 Connect the AC power supply cord. Note The included AC power supply cord is for use with this unit only. Do not use it with other equipment. Household AC outlet RQT7372 5