Panasonic SCPTX5 SAPTX5 User Guide - Page 8
step 3 AC cord connection, step 4 Preparing the remote control
View all Panasonic SCPTX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Simple Setup AC cord connection/Preparing the remote control 3 step AC cord connection To household AC outlet (AC 120 V, 60 Hz) AC IN Main unit AC power supply cord (included) Conserving power The main unit consumes a small amount of power, even when it is in standby mode (approx. 0.3 W). To save power when the unit is not to be used for a long time, unplug it from the household AC outlet. You will need to reset some memory items after plugging in the main unit. [Note] The included AC power supply cord is for use with the main unit only. Do not use it with other equipment. Also, do not use cords for other equipment with the main unit. 4 step Preparing the remote control ∫ Batteries Insert so the poles (i and j) match those in the remote control. Press in and lift up. R6/LR6, AA Replace the cover. ≥ Do not use rechargeable type batteries. Do not: ≥ mix old and new batteries. ≥ use different types at the same time. ≥ heat or expose to flame. ≥ take apart or short circuit. ≥ attempt to recharge alkaline or manganese batteries. ≥ use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control. Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place. ∫ Use Aim at the remote control signal sensor (➜ page 11), avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit. RQTX0014 8