Panasonic SL-1000 Owners Manual - Page 11

Adjustment Horizontal balance Preparation z Turn the arm-height control ring to raise the arm to the maximum height. ( 22) z Remove the stylus cover, taking care not to damage the stylus, then release the arm clamp. z Lower the cue lever. z Turn the anti-skating control to "0". 1 Free the tone arm from the arm rest and adjust horizontal balance by turning the balance weight. Hold the tone arm and turn the balance weight in the arrow direction to adjust the balance until the arm is approximately horizontal. z Take care not to allow the stylus tip to touch the turntable mat or main unit. Balance weight Hold here to turn Stylus pressure Preparation z Return the tone arm to the arm rest and fix it with the arm clamp. 1 Turn the stylus pressure control until "0" comes to the centre line of the rear of the tone arm. z Hold the balance weight still while doing this. Stylus pressure control Hold here to turn Balance weight Centre line Arm clamp Arm clamp Arm rest Cue lever Anti-skating control Balanced and the tone arm is parallel to the turntable. The balance weight is too far forward. The balance weight is too far back. Note z Refer to the user's guide for your stylus for the appropriate stylus pressure. 20 (20) English 2 Turn the balance weight to adjust to the appropriate stylus pressure for the cartridge. z The stylus pressure control will turn together with the balance weight. z Turn until the centre line points to the appropriate stylus pressure. Balance weight Hold here to turn Turns together Anti-skating 1 Turn the anti-skating control to adjust it to the same value as the stylus pressure control.   Centre line   Note z For stylus pressures 3 g and above, adjust anti-skating control to "3". 21 (21) English Getting started