Panasonic SL-1000 Owners Manual - Page 16

Troubleshooting guide Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, contact your dealer. No power z Is the AC mains lead plugged in? ¨Plug the mains lead in firmly. ( 16) z Is the control unit connected with the main unit? ¨Insert the control unit connection cable until it clicks. ( 16) No indication on the display of the control unit z Is the power plug connected? ¨Insert it firmly. ( 16) z Is the power on? ¨Press the power button to turn on the power. ( 24) z Is the display dimmer activated? ¨Operate a button (any button other than the power button) on the control unit. ( 28) There is power but no sound. Sound is weak z Are connections to the amplifier/receiver's PHONO terminals correct? ¨Connect the PHONO cables to the amplifier's PHONO input terminals. ( 16) Left and right sounds are reversed z Are the stereo connection cable connections to the amplifier or receiver reversed? ¨Double check all connections. ( 16) z Are connections of the head shell's lead wires to the cartridge terminals correct? ¨Double check all connections. Humming is heard during play z Are there other appliances or their AC mains lead near the stereo connection cable? ¨Separate the appliances and their AC mains lead from this unit. z Is the earth lead connected? ¨Make sure the earth lead is correctly connected. ( 16) 30 (30) English „ Error code Occurrence of an error will be notified as necessary on the display of the control unit and with the speed selector button indicators of the main unit. Display of the control unit Measure Check that the control unit is Unconnected connected with the main unit. ( 16) Consult your dealer. z One of the [33/45/78] speed selector button indicators of F58 the main unit blinks (rapidly F76 or slowly) in orange. F17 z Provide the displayed number and the LED's blinking status at the time of consultation. (Example of the display of the control unit in case of an error) Unconnected STARTɾSTOP (Example of the speed selector button indicators of the main unit in case of an error) Flashes in orange. 33 45 78 Specifications General Power supply AC 110-240 V, 50/60 Hz Power consumption 10 W (Power ON) 0.05 W (Power OFF) Dimensions (W×H×D) 110×84×350 mm (4-11/32×3-5/16×13-25/32 inch) 524×168×392 mm (20-21/32×6-5/8×15-7/16 inch) 531×188×399 mm (20-29/32×7-13/32×15-23/32 inch) Mass Approx. 2.1 kg (4.7 lbs) Approx. 38.0 kg (83.8 lbs) Approx. 40.2 kg (88.7 lbs) Operating temperature range 0 °C to 40 °C (32 °F to 104 °F) Operating humidity range 35 % to 80 % RH (no condensation) Turntable section Drive method Direct drive Motor Brushless DC motor Turntable Brass and Aluminum die-cast combined Diameter: 323 mm (12-23/32 inch) Mass: Approx. 7.9 kg (17.5 lbs) (includeing the turntable sheet) Turntable speeds 33-1/3, 45 and 78* rpm Variable range pitch ±16 % Starting torque 0.39 N·m (4.0 kg·cm) / 3.47 lb-in Braking system Electronic brake Wow and flutter 0.015 % W.R.M.S. (JIS C5521) Tone arm section Type Universal Static Balance Effective length 254 mm (10 inch) 239 mm (9-13/32 inch) Overhang 15 mm (19/32 inch) Tracking error angle Within 1° 48' (at the outer groove of 30 cm (12") record) Within 0° 30' (at the inner groove of 30 cm (12") record) Offset angle 21° Arm-height 0 - 15 mm adjustment range Stylus pressure 0 - 4 g (direct reading) adjustment range Applicable (Without the auxiliary weight) cartridge weight 15.9 to 19.7 g range (With the small auxiliary weight) (Including the 18.8 to 23.6 g head shell and mounting screws) (With the mid auxiliary weight) 22.5 to 26.3 g (With the big auxiliary weight) 26.0 to 31.0 g Terminal section Output terminal PHONO (DIN Jack) ·straight type cable only Specifications are subject to change without notice. *The turntable speed will be 78.26 rpm when set to 78 rpm (pitch control 0.0%). 31 (31) English Maintenance