Panasonic SR-AFM187 Operating Instructions - Page 24
Error Messages
View all Panasonic SR-AFM187 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Error Messages Please check before requesting a repair. Error display Please check Ref. page ● Has the pan being set? - →Press the [Cancel/Off] key until the error display disappears. Put the dedicated pan in, and perform the operation again. ● Is any foreign object attached to the bottom of the pan or the bottom sensor? 7 →Please remove foreign objects and dirt, and then press the [Cancel/Off] key. ● Is water too much? →Press the [Cancel/Off] key. - (For continuous cooking, you can slightly reduce the amount of water) ● Keep warm duration over 96 hours? 12 →Please press [Cancel/Off] key. ● Is the outer lid open? - ● Is the steam cap (taste catcher) mounted? 19 →If it is lost, please consult a Panasonic authorized service center. You can still cook without the steam cap (taste catcher), but ①Rice taste will deteriorate. (Rice will become dry during keep warm) ②Water may overflow when boiled. ③"U15" may be displayed again when cooking is finished. ④This may cause congee or porridge unable to be properly cooked. ● Is there any foreign object or oil dirt inside the steam cap (taste catcher)? 19 →Wash it thoroughly before it is installed. ● Has any dust or other foreign object clogged the intake port and the - exhaust port at the bottom of the rice cooker? →Remove dust according to the following steps. ①Press the [Cancel/Off] key, and then unplug the power plug. ②Remove the pan after the rice cooker cools down. ③Clear the dust in the intake port/exhaust port at the bottom of the rice cooker. ( P19) ● Is the rice cooker used on the carpet? 7 →Do not use the rice cooker where the bottom of the rice cooker may be clogged. If the rice cooker is still not back to normal after the above is confirmed, go to the Panasonic authorized service center for repair. ● Try to unplug the power plug and plug it in again. - If "H※※" still appears, then there is a fault. →Please consult the Panasonic authorized service center, and inform the error code (two digits after "H"). 24