Panasonic SR-ZG185 Operating Instructions - Page 16

When the display shows as follows

Page 16 highlights

How to use adjustable steam basket / When the display shows as follows How to use adjustable steam basket ■ Height adjustment Put your thumb on the ring on the inner wall of the rotating part, lift and slightly turn it counterclockwise, and then release your finger. The height of the adjustable steam basket will increase. To restore the previous size, hold the bottom of the rotating part with your palm, slightly turn it clockwise, and lift it up. Fixed part Rotating part ■ Disassembly Firstly, restore the adjustable steam basket to the initial state (shallow), turn it over on the table, and then press down firmly on the rotating part up to clap. Fixed part and rotating part will detach. ■ Assembly Direct the protrusion on the edge of the rotating part towards the groove on the inner wall of the fixed part, and then press with force on the bottom of the rotating part up to clap. groove When the display shows as follows Display U14 H01 H02 H05 Problems and troubleshooting Following continuous 96 hours Keep Warm function, the power supply will automatically cut off. Press button to resolve the error. Contact the authorized service center for repair. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

How to use adjustable steam basket /
When the display shows as follows
16
How to use adjustable steam basket
Fixed part
Rotating part
Height adjustment
Put your thumb on the ring on the inner wall of the rotating part, lift and slightly turn it counterclockwise, and
then release your finger. The height of the adjustable steam basket will increase. To restore the previous size,
hold the bottom of the rotating part with your palm, slightly turn it clockwise, and lift it up.
Disassembly
Firstly, restore the adjustable steam basket to the initial state (shallow), turn it over on the table, and then press
down firmly on the rotating part up to clap. Fixed part and rotating part will detach.
Assembly
Direct the protrusion on the edge of the rotating part towards the groove on the inner wall of the fixed part, and
then press with force on the bottom of the rotating part up to clap.
Problems and troubleshooting
y
a
l
p
s
i
D
U14
Following continuous 96 hours
Keep Warm
function, the power supply will automatically cut off.
Press
button to resolve the error.
Contact the authorized service center for repair.
When the display shows as follows
groove
H02
H01
H05