Panasonic WJ-HD616/1000 Installation Guide - Page 21
How to detach the front cover, How to attach the front cover
View all Panasonic WJ-HD616/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
How to detach the front cover Step 1 (When detaching the front cover while the power is on) Hold down the [ALARM RESET] button and the [MONITOR] button (for more than 2 seconds). → The power of the front cover will be turned off. Step 2 Open the maintenance port cover and the DVD drive cover, and then remove the fixing screws (x3). Cable clamp Connection cable Connector Note: • Before disconnecting the cable, be sure to turn off the power of front cover. DVD drive cover Maintenance port cover (Pull up the bottom side of cover.) Step 3 Pull the right side of the front cover first, and then detach the front cover. How to attach the front cover Step 1 Connect the connection cable of the front cover. When connecting the connection cable, twist the connection cable around the tab of the cable clamp. (☞ Reference illustration for step 4 of "How to detach the front cover") Step 2 Put the tab (on the left of the front cover) into the hole, and then attach the front cover. Hole Tab Step 4 Disconnect the connection cable of the front cover. • Detach the cables from the cable clamp on the front cover. • Disconnect the cable while holding down the tab of the connector. Step 3 Fasten the detached screws (x3), and then close the cover. Step 4 (When attaching the front cover while the power is on) Press the [ALARM RESET] button. → The power of the front cover will be turned on. 21