Panasonic WJ-HD616/1000 Installation Guide - Page 96
Con the settings relating to the FTP server [FTP]
View all Panasonic WJ-HD616/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Configure the settings relating to the FTP server [FTP] Select the [FTP] tab on the "Server" page. (☞ Page 60) The basic settings such as the FTP server address, user name and password and the setting to transmit alarm images at an event occurrence can be configured on this tab. [FTP server address] Enter an address or name of the FTP server to transmit images. The name of the FTP server is available only when selecting "Manual" or "Auto" for the "Network" page - the [DNS] tab. Enter up to 255 alphanumeric characters including hyphens (-) and periods (.). [User name] Enter a user name (login name) to access the FTP server. Enter up to 32 alphanumeric characters excluding (&) listed as follows. Note: • Available characters: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 [Password] Register a password to be entered when transmitting images to the FTP server. Enter up to 32 alphanumeric characters excluding "&" listed in the description of "Available characters". An entered character for the password will be displayed as "*" or "·". [Mode] Select the mode to transmit images to the FTP server. Change to "Passive" when sending images is difficult with "Active". Change to "Passive" when sending images is difficult with "Sequencial". ■ Image transmission by alarm [Server directory] Enter a directory of the server. Enter up to 128 alphanumeric characters (excluding listed in the description of "Available characters". Enter up to 255 alphanumeric characters excluding listed in the description of "Available characters". [Duration-pre] Select the duration of the images recorded by pre-event recording to be transmitted from the following. Off/1 s - 10 s (in 1 second intervals) Default: Off Important: • The setting for "Duration-pre" is the shortest duration to transmit images recorded by pre-event recording. The actual duration of the recorded images to be transmitted will be longer than the setting. • Images recorded by pre-event recording will not be transmitted when pre-event recording is not to be performed. Configure the setting to perform pre-event recording to transmit images recorded by pre-event recording. Refer to page 80 for further information on how to configure the settings relating to the pre-event recording. [Duration-post] Select the duration of the transmitted images for the postevent recording. Off/1 s - 10 s (in 1 second intervals) Default: 5 s [Alteration detection] Select "On" or "Off" to determine whether or not to attach an alteration detection code to recorded images to be transmitted using the viewer software when an alarm occurs. 96