Panasonic WJ-HD616/1000 Installation Guide - Page 80
Manual rec./Schedule rec./Event rec.
View all Panasonic WJ-HD616/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
[Resolution] Select a resolution for images to be recorded. Field: Standard resolution (704 x 240) Frame 3D On: High resolution (704 x 480) with the motion blur compensation function Frame 3D Off: High resolution (704 x 480) Default: Field [Maximum REC rate] (Only for HD716K) Select the maximum recording rate that is available for each channel. The available values vary depending on the setting of "Resolution". • When "Frame 3D On" or "Frame 3D Off" is set for "Resolution" 16ch-15 ips: Up to 15 ips can be set for each channel. 8ch-30 ips: Up to 30 ips can be set for each channel. However, the cameras that can be used for recording are restricted to 8. • When "Field" is set for "Resolution" 16ch-30 ips: Up to 30 ips can be set for each channel. Select the following setting items for each recording mode (manual recording, schedule recording, event recording, preevent recording and post-event recording). On the first page, the setting items for CAM 1 to 4 are displayed.To display the other camera channels, select the [Next page C] button. ■ Manual rec./Schedule rec./Event rec. [Quality] Select the image quality from the following. XF (Extra Fine): Extra fine quality SF (Super Fine): Super fine quality FQ (Fine): High quality NQ (Normal): Standard quality EX (Extended): Low quality (Recording for a long period of time) Default: FQ [Rate(ips)] Default and available values differ depending on the setting of "Resolution". When "Off" is selected for a specified camera channel, images from a camera channel set to "Off" will not be recorded. • When "Frame 3D On" or "Frame 3D Off" is selected for "Resolution" Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips (Only for HD716K) Default: 7.5ips (15ips for HD716K) • When "Field" is selected for "Resolution" Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips/ 30ips (Only for HD716K) Default: 15ips (30ips for HD716K) When "8 ch-30 ips" is selected for "Maximum REC Rate", "30 ips" is available for "Rate". [Pre-event Duration] Select the recording duration for the pre-event recording. 0s/2s/5s/10s/20s/30s/1min/3min/5min/10min/15min Default: 0s Note: • It may be possible that the actual recording will be lon- ger than the selected recording duration. • Pre-event recording is not performed when "0s" is selected. • When images are set to be recorded together with audio, the audio may not be recorded at the beginning of the pre-event recording. [Post-event Duration] Select the recording duration at an alarm occurrence (postevent recording duration). 2s/5s/10s/20s/30s/1min/3min/5min/10min/15min Manual: Recording duration will be as follows depending on the alarm type. Video motion detection (VMD): Recording will be per- formed for 8 seconds. At a video loss occurrence: Recording will be per- formed during a video loss occurrence Terminal alarm: Recording will be performed while the terminal alarm signal is being supplied. Camera site alarm: Recording will be performed for 8 seconds. Con.(Continue): Record until the ALARM RESET button is pressed [Back] button Closes the "Program setup" page and returns to the [Time table] tab. 80