Panasonic WJ-ND400/1000 Operating Instructions - Page 57

Error log Description of error Error log Network log LCD Output from connector Other errors for HTTP − OTHER_ERR − Network error output Move to Config − − CONFIG − Camera SD memory card error CAM cc SD ERR − NW ERR CAMERA cc SD ERROR Camera error output Request to start writing on CAM cc SD START ERR the camera SD denied − NW ERR CAMERA cc SD ERROR Camera error output Request to finish writing on CAM cc SD END ERR the camera SD denied − NW ERR CAMERA cc SD ERROR Camera error output Request to obtain a data list CAM cc GET LIST ERR on the camera SD denied − NW ERR CAMERA cc SD ERROR Camera error output Request to obtain SD CAM cc GET IMG ERR memory data on the camera SD denied NW ERR CAMERA cc SD Camera error − ERROR output Request to delete SD CAM cc DEL IMG ERR memory data on the camera SD denied NW ERR CAMERA cc SD Camera error − ERROR output *1 HDD remove error is an error that occurs when the hard disk drive is removed without pressing the respective USE button. *2 In the RAID 5 mode or the RAID6 mode, only "Error log" is displayed, but neither "Indication on the LCD" nor "Output from the connector on the rear panel" is displayed. *3 "HDD SKIP" is the function that continues recording even when an error occurs, such as an HDD write error, by recording images on the next HDD. *4 "Video loss" is an error that may occur between the WJ-NT304, WJ-NT314 and the camera connected to the WJ-NT304.To detect video loss occurrences using the WJ-ND400, it is necessary to configure the "Panasonic alarm protocol " setting of the WJ-NT304, WJ-NT314, and the "Site alarm " setting of the WJ-ND400. Refer to page 58 for information on symbols used on the table above. 57