Panasonic WJHD309 WJHD309 User Guide - Page 120

120

8

DNS

Select "MANUAL" or "AUTO" to enable searching for an IP

address by its host name using DNS. When "OFF" is select-

ed for "DHCP" (no use of the DHCP server), select "MANU-

AL" and enter the domain name and the DNS server

address. If "ON" is selected for "DHCP" (use of the DHCP

server), select "AUTO". When DNS is not used, select "OFF".

When "MANUAL" is selected for DNS, enter the DNS server

address for "Primary" and "Secondary".

8

DDNS

Select ON and OFF whether or not to use the DDNS

(Dynamic Domain Name Server).

Selecting ON is available only when "MANUAL" or "AUTO" is

selected for "DNS".

When "ON" is selected, perform the following.

User Name:

Enter the user name registered in "DDNS".

Password:

Enter the password for the user entered in

"User Name".

Access Interval:

Select an interval to update DNS from the

following.

10 m/30 m/1 h/6 h/24 h

8

Host Name

Enter the host address registered in DDNS.

Enter a host name of no more than 255 alphanumeric char-

acters. Hyphens (-) are also available for the host name.

8

Domain Name

Enter the domain name of this unit.

Enter a domain name of no more than 255 alphanumeric

characters. Hyphens (-) are also available for the domain

name.

●

[NTP Setup] Time adjustment of network

Perform the following settings for time adjustment.

8

Time Adjustment

Select ON and OFF whether or not to adjust the time with

reference to the NTP server.

ON:

Adjusts time with reference to the NTP server.

OFF:

Does not function.

Note:

Time adjustment will be performed automatically

when the clock time is inaccurate to within ±5 seconds

from the standard time of the NTP server.

8

Time Zone

Set the time zone in accordance with the place of use when

using the NTP server for time adjustment.

8

NTP Server Address

Enter the NTP server address when using the NTP server

for time adjustment.

8

Refresh Interval

Select an interval of time inquiry to be transmitted to the

NTP server from the following.

1 h/2 h/6 h/12 h/24 h

Important:

Recording will not be performed for around 4 seconds

when changing the present time (accurate to within ±5

seconds) using "Time Adjustment".

Schedule

System

Comm

Switcher

SETUP MENU

LIVE

Maintenance

Recording

Event

Display

Camera Control

PS.DATA Setup

RS485 Setup

RS232C Setup

NW Setup 1

NW Setup 2

NTP Setup

■

Time Adjustment

■

Time Zone

■

NTP Server Address

■

Refresh Interval

OFF

6h

GMT

0 : 00

Section	Page
PREFACE	4
FEATURES	4
PRECAUTIONS	5
TRADEMARKS AND REGISTERED TRADEMARKS	6
ABOUT THESE OPERATING INSTRUCTIONS	6
LIMITATION OF LIABILITY	6
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS	7
Front View	7
Rear View	9
On Monitor 1 (To display only live image)	10
On Monitor 2 (To display live or recorded images)	11
STARTUP	16
CLOCK ADJUSTMENT	17
SHUTDOWN	18
RECORDING (Manual Recording)	19
RECORDING (Emergency Recording)	21
PLAYBACK	22
PLAYBACK IMAGE ON A DESIGNATED DISK	25
PLAYBACK FROM A DESIGNATED TIME AND DATE	27
SEARCH AND PLAY	28
Search for a Recording Event and Play it back (Recording Event Search)	28
Search for a motion detected time and date from the recorded images and play it (VMD search)	32
To delete the motion detection area	36
Search for a marked point and play from that point (Marking search)	37
MONITOR LIVE IMAGES	38
Displaying Live Images on a Single Screen	38
Electronic Zoom	38
Displaying on a Multi-screen	39
Sequential Display	40
CONTROL CAMERAS	41
Panning/Tilting	41
Zoom	41
Focus	41
Iris	42
Preset Action	42
Move a camera to the preset position	43
Auto Function (Auto Pan, etc)	44
ABOUT THE EVENT FUNCTION	45
Action at an event occurrence	45
Alarm Function	46
Cancel the Alarm Action	47
Suspend the Alarm Actions	47
COPYING (Duplicate)	48
DELETE DATA ON THE DISK	50
Deletion of recorded images saved on the hard disk manually	50
FORMAT (INITIALIZE) A DVD-RAM DISK	52
DISPLAY/EDIT TEXT INFORMATION	54
ERROR/WARNINGS	56
OPERATION USING A SYSTEM CONTROLLER	58
OPERATION USING A PC	62
Features	62
System Requirements of a PC	62
OPERATION OF THE UNIT IN THE CASCADE CONNECTION	63
Features	63
Operation using the buttons on the front panel	63
Operation using a system controller	63
INSTALLATION IN THE RACK	64
MANAGEMENT OF USERS/HOSTS	65
OPERATING THE UNIT FOR THE FIRST TIME	67
Preparation for maintenance (HDD replacement, installation, etc.)	68
CONNECTIONS	70
Connections when the unit is used independently	70
Connections with an extension unit	71
Connections with DVD-RAM, CD-R, and DVD-R drives	72
Connections with the VTR	73
Connections with PS・Data systems	74
Cascade connection of multiple units	76
Connection with the RS485 camera	80
Mode Switch	82
RS485 Port	82
How to Use the Terminals of the ALARM/CONTROL Connector	83
How to Use the Terminals of the ALARM Connector	87
How to Use the SERIAL Connector	89
SETUP	90
Item list of the SETUP MENU	90
About the SETUP MENU	92
Basic Operation with the SETUP MENU	93
[Maintenance] Functions for Maintaining	94
[Recording]	98
[Event] Function for Events	100
[Schedule] Settings for the recording/event action schedule	105
[Switcher] Settings for the switcher function	110
[Display]	113
[Comm] Settings for communication with other devices	116
[System] Settings on System	121
DISPLAY SETUP MENU OF CAMERA	127
DISK MANAGEMENT	128
Notes on the hard disk	128
How to replace the built-in hard disk	128
About the HDD DISK MENU	131
Display of the HDD DISK MENU	131
RAID 5 Function of the Extension Unit	132
Formatting (Initialization) the Hard Disk	133
Setting for Mirroring	137
SERIAL (RS232C) CONNECTOR COMMAND REFERENCE	141
SERIAL (RS232C) Communication Protocol	141
Command Format	141
FLOWCHART OF THE SETUP MENU	151
PARAMETERS AND THE DEFAULT SETTINGS OF THE SETUP MENU	152
TROUBLESHOOTING	158
SPECIFICATION	162

Panasonic WJHD309 WJHD309 User Guide - Page 120

NTP Setup] Time adjustment of network, Host Name, Domain Name, Time Adjustment, Time Zone

Page 120 highlights