Panasonic WJHD309 WJHD309 User Guide - Page 85
Connection for the Auto Adjust Time function
View all Panasonic WJHD309 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Earth Sensor input Alarm input Alarm reset input Series recording input Time adjust input Earth Alarm output Alarm reset output Alarm recording During recording Disk Buzzer output System error output Temperature error output Time adjust output Series recording output G Connection for the Auto Adjust Time function • When "Auto Adjust Time" of "System" on the SETUP MENU is set to "MASTER" "Time Adjust Output" becomes available and the clock of this unit can be applied to other units. (Earth) (Time adjust output) !3 @0 Terminal block of other units Front LED monitor output ALARM/CONTOROL • When "Auto Adjust Time" of "System" on the SETUP MENU is set to "SLAVE" "Time Adjust Input" becomes available. When a signal output from other equipment is supplied to the time adjust I/O terminals between 00 minutes 00 seconds and 14 minutes 59 seconds every hour or between 45 minutes 00 seconds and 59 minutes 59 seconds every hour, the clock will be set to "00 minutes 00 seconds" of the closest hour. Example: Signal is supplied at 2:50:00 (hour:minute:second)pm → Set at 3:00:00 pmM Signal input supplied at 3:14:45 pm → Set at 3:00:00 pm Signal is supplied at 3:20:00 pm → Time will not be adjusted. (Earth) (Time adjust output) !3 @0 Terminal block of other units Front LED monitor output Earth Sensor input Alarm input Alarm reset input Series recording input Time adjust input Earth Alarm output Alarm reset output Alarm recording During recording Disk Buzzer output System error output Temperature error output Time adjust output Series recording output ALARM/CONTOROL Important: Recording will not be performed for around 4 seconds when changing the present time (accurate within ±5 seconds) using the time adjustment input (pin no.20). 85