Panasonic WVCU650 Operating Instructions - Page 43
Defroster Control, Auxiliary Control, Other Functions, Operating Procedure Latch mode
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
■ Defroster Control The following procedure is available when a selected camera (housing) is equipped with a defroster. 1. Select a system unit, monitor, and desired camera. (Refer to p. 31 System Unit Selection, p. 32 Monitor Selection, and p. 32 Camera Selection.) 2. Press the DEF ON/OFF button. The defroster will be activated. Note: The defroster will be automatically deactivated after the specified time. 3. To deactivate the defroster, press the DEF ON/OFF button while holding down the SHIFT button. ■ Auxiliary Control You can control one or two auxiliary control devices. The following procedure is available when an auxiliary control device, such as Receiver WV-RC150, is connected to a system unit. Note: The operation procedure differs depending on the mode setting (=latch or momentary mode) of auxiliary control device. ■ Other Functions You can control the following functions by pressing the function buttons (F1 to F8). Refer to p. 55 MENU FUNCTION DETAILS. • Camera setup (p. 55) • Auto mode (p. 55) • BW mode (p. 55) • Patrol Learn (p. 56) • Auto pan setup and activation (p. 57) • Camera cleaning (p. 60) • Camera function (p. 69) • Auto pan (p. 70) • Camera sequence (p. 70) • Camera sort (p. 70) • Patrol play (p. 70) • Home position (p. 71) • Auto focus (p. 71) • Iris reset (p. 71) • Camera +1 (p. 71) • Camera -1 (p. 72) ● Operating Procedure (Latch mode) 1. Select a system unit, monitor, and camera an auxiliary control device is connected to. (Refer to p. 31 System Unit Selection, p. 32 Monitor Selection, and p. 32 Camera Selection.) 2. Press the AUX 1 ON/OFF or AUX 2 ON/OFF button. The auxiliary control device, associated by the installation wiring, will be activated. 3. To quit the auxiliary control, press the AUX 1 ON/OFF or AUX 2 ON/OFF button while holding down the SHIFT button. ● Operating Procedure (Momentary mode) 1. Select a system unit, monitor, and camera an auxiliary control device is connected to. (Refer to p. 31 System Unit Selection, p. 32 Monitor Selection, and p. 32 Camera Selection.) 2. Keep pressing the AUX 1 ON/OFF or AUX 2 ON/OFF button. The auxiliary control device, associated by the installation wiring, will be activated while this button is being pressed. 43