Panasonic WVCU650 Operating Instructions - Page 53

LCD MENU CAM 101 Camera Setup 2. Select a desired function. Select a desired category by rotating the shuttle ring. LCD MENU SYS 301 System Setup 3. Select a function name by rotating the JogDial. LCD MENU Mux Still SYS 305 • You can skip Step 2 if you know what function to recall. In this case, enter a function number, and press the ENTER button. 4. Press the function button you wish to assign the function for two seconds. The function will be assigned to the button, and the message will appear for a few seconds. Mux Still 305 Assign F2 Notes: • To assign menu functions to F5 to F8 buttons, press one of the F1 to F4 buttons for two seconds while holding down the SHIFT button. • The setting procedure differs depending on each function. Refer to pp. 55 to 73. 5. To exit the menu, press the EXIT or MON (ESC) button. The LCD display will return to the default status. ■ To Assign Menu Functions to Joystick Function Buttons Joystick button functions are assignable to the A, B, or top button on the 3D joystick unit. (Refer to p. 68 to 72 for each function.) 1. Perform Step 1 to 3 in "To Assign Menu Functions to Function Buttons". (Refer to p. 52.) Note: Skip the next step when assigning neither "Camera Function" nor "System Function". 2. Enter a desired camera or system function number with the numeric buttons. The entered number will appear on the LCD for a few seconds. J/S MENU ____1 Camera Function Notes: • The illustration is an example in which Camera Function Number 1 is pressed. • Refer to the operating instruction of camera for details on camera function. • Refer to the operating instruction of system unit for details on system function. 3. Press the A, B or top button for two seconds. • The menu function will be assigned to the button you pressed. • "Assign" message will appear for a few seconds, as shown in the illustration. Camera Function 501 Assign A Code= 1 Note: The illustration is an example in which "Camera Function Code = 1" has been assigned to the A button. 4. To exit the menu, press the EXIT or MON (ESC) button. The LCD will return to the normal display. ■ To Recall Button Functions and Joystick Button Functions You can recall the assigned button functions and joystick button functions as follows. 1. Press one of the function buttons (F1 to F4/F5 to F8) or one of the joystick function buttons (A, B, and top buttons). The sub menu of recalled function will appear on the LCD. Mon02 Cam128 HD316 F1 F2 F3 F4 Camera Setup F1 On Off Rst A.Rst Note: To recall a function assigned to the F5 to F8 button, press the function button while holding down the SHIFT button. 2. Perform the operations to activate the function. The operating procedure differs depending on each function. Refer to pp. 55 to 73. Note: To cancel the function, press the EXIT or MON (ESC) button. The LCD display will return to the normal status. 53