Panasonic WVNP1000 WVNP1000 User Guide - Page 37

Configure the settings of the servers [Server setup] The settings relating to the mail server and the FTP server can be configured on this page. The "Server setup" page has 2 tabs of the [Mail] tab and the [FTP] tab. Configure the settings relating to the mail server [Mail] Click the [Mail] tab on the "Server setup" page. The settings relating to the mail server used to send the alarm mail can be configured on this page. [SMTP server address]* Enter the IP address or the host name of the SMTP server used to send e-mails. Number of characters for the SMTP server address: 1 - 128 characters [POP server address]* When "POP before SMTP" is selected for "Authentication", enter the IP address or the host name of the POP server. Number of characters for the POP server address: 1 - 128 characters * Important: When entering the host name for "POP server address", it is necessary to configure the DNS settings on the [Network] tab of the "Network setup" page. ( page 39) [Authentication] Select the authentication method to send e-mails from the following. None: It is unnecessary to clear any authentication to send e-mails. POP before SMTP: It is necessary to clear the POP server authentication first to use the SMTP server to send e-mails. SMTP: It is necessary to clear the SMTP server authentication to send e-mails. Default: None [User name] Enter the user name to access the server. Number of characters for the user name: 1 - 32 char- acters [Password] Enter the password to access the server. Number of characters for the password: 0 - 32 char- acters [Sender mail address] Enter the mail address of a sender. Entered mail address will be displayed in the "From" (sender) line of the sent mails. Number of characters for the sender address: 3 - 128 characters 37