Panasonic WVNP1000 WVNP1000 User Guide - Page 38
Con the settings relating to the FTP server [FTP]
View all Panasonic WVNP1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Configure the settings relating to the FTP server [FTP] Click the [FTP] tab on the "Server setup" page. ( page 37) The settings relating to the FTP server used to transmit the alarm images can be configured on this page. [FTP mode] Select "Passive" or "Active" for the FTP mode. Normally, select "Passive". When failed to establish the connection, select "Active". Default: Passive [FTP server address] Enter the IP address or the host name of the FTP server. Number of characters for the FTP server address: 1 - 128 characters Important: When entering the host name for "FTP server address", it is necessary to configure the DNS settings on the [Network] tab of the "Network setup" page. ( page 39) [User name] Enter the user name (login name) to access the FTP server. Number of characters for the user name: 1 - 32 char- acters [Password] Enter the password to access the FTP server. Number of characters for the password: 0 - 32 char- acters [Control port] Enter a control port number to be used for the FTP server. Available port number: 1 - 65535 Default: 21 38