Panasonic XE9WKUA Full Line Catalog - Page 55

LonWorks Integration CZ-CLNC1U The CZ-CLNC1U LonWorks Interface can control up to 16 indoor units. Monitors and controls all generations of PACi, ECOi and ECOi EX systems. Connecte directly into the communication bus and is field-configured via dip switches. The CZ-CLNC1U offers the following setting and monitoring objects. Some Objects are not available on all indoor models. Indoor Unit Operation/Setting Objects • On/Off • Mode • Setpoint • Fan Speed • Air Direction (n/a for Ducted Units) Indoor Unit Monitor/Status Objects • On/Off • Mode • Setpoint • Fan Speed • Air Direction • Space Temperature • Unit and System Error Codes RAC Connectivity to PACi, ECOi and ECOi EX CZ-CAPRA1 This adapter serves and an interface required to connect a central control device, such as an intelligent controller, with the a room air conditioner. Using this adapter can operate or monitor the room air conditioner from a central control device. Panasonic room air conditioners equipped with the CN-CNT terminal are supported. Features: The following operations from the central control device can be performed • Operations to start/stop the room AC, switch to operation mode, and set the temperature, fan speed and fan direction (up/down). • Monitor the operation status and abnormality of room air conditioner. • Prohibiting the remote control operation of room air conditioner • Using On/Off contact of external connection can start/stop the room air conditioner, prohibit/permit the remote control operation, and perform emergency stop. A coin timer or card key can also be contacted. • Retrieving the operation signal of abnormal signal of room air conditioner. (An external power source (DC12V) is separately required.) 2020 FULL LINE CATALOG 55