Paradigm Soundscape Manual - Page 10

CONNECTION WARNING! ACTION REQUIRED: Turn the Soundscape system OFF before making or breaking any signal connections! The power cord should NOT be installed, removed or left detached while the other end is still connected to an AC power source. POWER CONNECTION The power cord should be inserted into the AC power receptacle on the rear panel, then to a nearby AC wall outlet. The Soundscape integrates a signal sensing power supply that automatically switches to 'Standby' after 20 minutes. Plugged into the wall, with no signal sensed, the Soundscape will remain in standby mode. SIGNAL CONNECTION When using the Soundscape to reproduce TV audio, your television's audio output should be defeated. Some televisions will allow you to turn off the internal speaker via the television's menu system. Others may require you to turn the television's volume to'zero'or'mute'. Follow the instructions in your TV's Owners Manual to zero or mute the volume. WHERE ARE CONNECTIONS MADE? Audio connections are made at the signal input section on the unit's rear panel and wirelessly for Bluetooth. Five inputs are available (Fig. 9): • 2 x Digital Optical inputs • 1 x Digital Coaxial (RCA) input • 1 Pair x Left/Right Analog (RCA) inputs • Bluetooth (wireless) WARNING! CUSTOMERS OUTSIDE OF NORTH AMERICA: If you remove your Soundscape from the region or country of original sale, make certain the AC power supplied inthe new area is suitable before connecting and operating your Soundscape. Substantially impaired performance or severe damage may occur if operation is attempted from an incorrect AC power source. Such damage is not covered under the product's warranty. Optical In 12 AC Power In Fig. 9 Analog In Sub Out Coax In EN-9