Paradigm Soundscape Manual - Page 21

Menu Option: DISPLAY DISPLY [DISPLAY]: Enter the 'DISPLY' submenu by pressing the 'Scroll Right' directional button. The settings in this menu allow you to adjust the brightness of the Soundscape's display and configure the display to turn on and off automatically. DISPLY [DISPLAY ] > BRIGHT: This option configures the Soundscape's display to be on at full brightness. DISPLY [DISPLAY] > DIM: This option configures the Soundscape's display to be on at a reduced brightness when the Soundscape is on. Activate the option by pressing the 'Select' button and the Soundscape will respond with 'SET'. DISPLY [DISPLAY] > AUTO OFF: This option configures the Soundscape's display to be on at a full brightness when a setting (such as volume or input) is changed. After a few seconds, the display will turn off. Activate by pressing the 'Select' button and the Soundscape will respond with 'SET'. Menu Option: INSTALL 'INSTAL' [INSTALL]: Enter the 'INSTAL' submenu by pressing the 'Scroll Right' directional button. The settings in this menu will adjust the Soundscape's equalization and voicing for optimal performance on the wall or on a flat surface (i.e. credenza or shelf ) installation. 'INSTAL' [INSTALL > 'ON WALL': This option configures the Soundscape's audio output to sound best in an on-wall installation. Activate the option by pressing the 'Select' button and the Soundscape will respond with 'SET'. 'INSTAL' [INSTALL] > 'ON.SHELF' [ON SHELF]: This option configures the Soundscape's audio output to sound best on a flat surface (credenzal or shelf ) installation. Activate the option by pressing the 'Select' button and the Soundscape will respond with 'SET'. Menu Option: SUB SUB: Enter the 'SUB' submenu by pressing the 'Scroll Right' directional button. Here you may configure the Soundscape for external subwoofer integration. PLEASE NOTE: When you select the 'SUB' 'WIRED' option in the Menu, a wireless connection is no longer viable until the menu option for wireless is turned back on. However, when you select 'SUB' 'WIRELES' [WIRELESS] in the menu, the Soundscape will still support a wired subwoofer connection. It is possible to connect multiple wired subwoofers using a 'Y' splitter attached to the subwoofer cable, wireless receiver, or an output on the rear of your subwoofer that is designed to daisy chaining multiple subs. See your Paradigm dealer for more information. 'SUB' > INTERNL' [INTERNAL]: This option allows the Soundscape to handle all bass information. No external subwoofer is required or allowed when this mode is activated. Activate the option by pressing the 'Select' button and the Soundscape will respond with 'SET'. 'SUB' > 'WIRED' : This option configures the Soundscape to use an external subwoofer connected with a cable to the Soundscape's Sub Out RCA connection. Activate by pressing the 'Select' button and the Soundscape will respond with 'SET'. TIP! Reference your external subwoofer's Owners Manual to learn how to correctly adjust level and phase control to achieve seamless blending with the Soundscape. 'SUB' > 'WIRELES' [WIRELESS]: Enter the 'SUB' 'WIRELES' [WIRELESS] submenu by pressing the 'Scroll Right' directional button. Using the included wireless subwoofer receiver you can sync the Soundscape with a Paradigm or other brand of subwoofer. EN-20