Pentax K10D User Manual - Page 220

218 Error Message Description Battery depleted The batteries are exhausted. Install new batteries in the camera. (p.43) Not enough battery remaining to clean sensor Appears during CCD cleaning if the battery level is insufficient. Replace the battery with a new one or use an AC adaptor D-AC50 (optional). (p.47) Image folder cannot be created The maximum folder number (999) and file number (9999) are being used, and no more images can be saved. Insert a new SD Memory Card or format the card. (p.188) The image is not stored The image could not be saved because of an SD Memory Card error. The DPOF settings or rotated image could not Settings not stored be saved because SD Memory Card is full. Delete unwanted images and perform DPOF settings or rotation again. (p.100) 5 RAW images cannot be set DPOF cannot be applied to the RAW images. Appendix RAW images are not supported RAW images cannot be processed using the digital filter. No image to be filtered When digital filter is started from [Q Playback] menu, this message appears if all saved images are RAW files or images captured with other cameras. This image cannot be filtered Appears when digital filter is started from Fn menu for images captured with other cameras. No DPOF files No file set with DPOF. Set DPOF and then print. (p.106) Printer error There is an error with the printer and the file cannot be printed. Fix all the errors and try printing again. No paper in the printer Printer has run out of paper. Put paper in the printer and print. Low ink level in the printer Printer is running out of ink and appears once this signal is received from the printer. After two seconds, the printer resumes printing. No ink in the printer Printer has run out of ink. Replace ink and print. Paper stuck in the printer Paper is jammed in the printer. Remove paper and print. Data error A data error has occurred during printing.