Pentax K10D User Manual - Page 224

Appendix 222 5 Exposure Mode A, Green, e Hyper-program, K Sensitivity priority, b Shutter priority, c Aperture priority, L Shutter & Aperture priority , a Hyper-manual, p Bulb, M Flash X-sync speed Shutter Electronically controlled vertical-run focal-plane shutter, Speed range (1) Auto 1/4000 to 30 sec. (stepless), (2) Manual 1/4000 to 30 sec. [1/2 EV step or 1/3 EV step] (3) Bulb, Electromagnetic release, Shutter lock by setting Main switch in OFF position. Lens Mount Pentax KAF2 bayonet mount (AF coupler, lens information contacts, K-mount with power contacts) Lens Used Pentax KAF2 mount lenses, KAF mount lenses, KA mount lenses Autofocus System TTL phase-matching autofocus system (SAFOX VIII), AF operational brightness range: EV -1 to 18 (at ISO 100 with f/1.4 lens), Focus lock available, Focus Mode: l (Single)/k (Continuous)/\, Adjustable AF point Viewfinder Pentaprism Finder, Interchangeable Natural-Bright-Matte II focusing screen, Field of view: 95%, Magnification 0.95× (with 50 mm f/1.4 lens at ∞), Diopter: -2.5m-1 to +1.5m-1 (per meter) Focus information: ] is lit when in-focus and blinking when unable to focus, b is lit = Built-in flash ready, b is blinking = Flash should be used Viewfinder Indication or incompatible lens is being used, Shutter speed, Confirm Sensitivity, Aperture value, e-dial enabled indicator, @ = AE lock, Capacity remaining, m = EV compensation, N = Flash compensation, \ = Manual focus, o = ISO warning, Shake Reduction display, EV bar LCD Panel Display b is lit = Built-in flash ready, b is blinking = Flash should be used or incompatible lens is being used, 3 = Auto discharge, > = Redeye reduct, Q = Slow-speed sync, 9=Single frame shooting, j = Continuous shooting, g = Self-timer, h= Remote control shooting, ? = Battery exhaustion warning, ] = Auto bracket exposure (EV steps can be set to 1/2 EV or 1/3 EV), N = Flash compensation, ISO warning, Shutter speed, Aperture value, White Balance, Capacity remaining and m = EV compensation, PC (mass storage)/Pb (PictBridge) appears when the USB cable is connected, EV bar, 1, 1P Preview Function Optical Preview: Depth of field confirmation (electronically controlled and usable in all exposure modes) Digital Preview: Composition, exposure, focus and white balance confirmation Continuous Shooting Approx. 3 fps, JPEG: until SD Memory Card is full RAW: up to 9 frames Self-timer Electronically controlled with delay time of 12 sec./2 sec. (with mirror up function). Start by pressing shutter release button. Operation confirmation: Possible to set beep. Can be cancelled after operation Remote Control Pentax Remote Control F (optional) Release shutter immediately or three seconds after pressing the remote control shutter button. Mirror Quick-return mirror, mirror up function (2 sec. self-timer) Exposure Bracket Three or five frames (underexposed, proper exposure and overexposed) are shot continuously with exposure bracketing. (Selectable between 1/2 EV and 1/3 EV for EV steps) Extended Bracket Three frames are saved continuously with white balance, saturation, sharpness and contrast bracketing.