Pentax ZX-60 ZX-60 Manual - Page 48
Iyerview, Flash, Function
View all Pentax ZX-60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
IyERVIEW OF FLASH FUNCTION Using Pentax dedicated auto flash units If the built-in flash is not powerful enough, a Pentax dedicated auto flash should be used. A Pentax dedicated TTL Auto Flash like the PENTAX AF FTZ or AF FT series flash unit (i.e.: AF500FTZ, AF330, AF280T or AF220T) incorporate the TTL Flash Mode. Using the TTL Auto Flash Mode 1. Remove the hot shoe cover FK. Store the removed hot shoe cover in the strap pocket. 2. Attach a Pentax dedicated flash unit to the camera. 3. Turn the flash ON. 4. Set the flash mode to the TTL Auto Mode. 5. Confirm that the flash is fully charged. 6. Focus on the subject and depress the shutter release button to take a picture. MEMO • When the flash is fully charged, the ready lamp on the flash unit lights up. When the shutter release button is depressed halfway down, rcl appears in the viewfinder indicating the flash is ready. • An external flash can also be made to automatically fire. Note that the flash will not fire against a lighter subject especially during daytime synchro shooting. • Read the operating manual of the flash unit for more details. Using both the built-in flash and the external flash An external flash cannot be used when the built-in flash is in its popped up position. When the built-in flash and the external flash are used simultaneously, use the following optional accessories. Hot Shoe Adapter Po Off-Camera Shoe Adapter F Extension Cord F5P C I C- 7L 1. Remove the hot shoe cover FK from the camera. Store the removed hot shoe cover in the strap pocket. 2. Attach the hot shoe adapter FG to the camera. 3. Connect the extension cord F5P to the hot shoe adapter FG Turn the flash ON. 4. Attach the Off-Camera shoe adapter F to a tripod Set the flash mode to the TTL Auto Mode. 5. Attach the flash unit to the Off-camera shoe adapter F Connect the extension cord F5P to the Off-camera shoe adapter F. 6. Depress the flash pop up button to activate the built-in flash. 7. Confirm that the all flash units are fully charged. 8. Focus on the subject and depress the shutter release button to take a picture. 6PYAriFfil 9PRIATIQNs