Pentax ZX-60 ZX-60 Manual - Page 53
Troubleshooting
View all Pentax ZX-60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
TROUBLESHOOTING What appears troublesome may be easily remedied. Here are some problems that may occur and their remedies. Before contacting a Pentax service center, check the following items. Symptoms Causes Remedies Aekerce The shutter does not Non-Autofocus lens is release attached. Use F or FA Autofocus lens. R34 The lens aperture ring is set Set the lens aperture ring to to other than thenposition. the FA- 1 position. P34 The main switch is [OFF]. Turn the main switch ON. P.23 Nothing is displayed on the LCD panel. The low battery warning ac l Replace the battery. is blinking. P.22 The batteries are installed Install the batteries properly. P 19 backwards. lisol and film speed are Set the Exposure mode displayed on the LCD panel. other than ISO. P75 The built-in flash is being Wait until the flash is fully p76 charged. charged. The main switch is (OFF]. Turn the main switch ON. P.23 No battery has been installed. The batteries are installed backwards. The battery is dead. Install the batteries. P.19 Install the batteries properly. P 19 Replace the batteries. P19 The Autofocus does not work. AF frame is not placed over the subject. The subject is too close. The focus mode is set to MF . The subject is difficult to autofocus. Move the camera until the AF frame Ocovers the subject. P40 Increase the camera-tosubject distance. P41 Set the focus mode switch to p37 M. Focus manually by using the p73 matte field. Symptoms Causes .,.. ....... .• Remeaes Rance AE lock function do not operate. The Metered Manual Mode Set the exposure mode dial or Bulb Timer Exposure to the other position. P.71 Mode is being used. Focus indicatortirlin The subject is too close or the viewfinder blinks. difficult to autofocus. Focus manually by using the matte field. P.73 The built-in flash does not charge. Low battery warningl.Non Replace the batteries. the LCD panel blinking. I Pt9 The built-in flash does The exposure mode is being Set the mode dial other not activate when the set to 10 . thanr01. P.83 flash-pop up button is depressed. The built-in flash does not pop up automatically. The mode dial is set to Set the exposure mode dial other than the Picture Mode. to the Picture Mode. Flash mode is not set to Set the flash mode dial to Auto pop up mode ( ). (MB) or (0:DRIM2). The built-in flash When theme appears on does not discharge the LCD panel. the built-in even if the flash is in flash does not discharge in the popped-up position. bright lighting conditions. P52 P35 P.35. P.76 The power zoom The camera does not have system does not the power zoom function. P.14 function. n rare cases, the camera may not operate correctly due to statistic electricity. This can be remedied by taking the batteries out and putting them back in again. •