Pfaff 360 Owner's Manual - Page 30
cut1e, hotItinfJ
View all Pfaff 360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
'7cut1e $hotItinfJ 1. Machine Skips Stitches Cause: Needle incorrectly inserted. Wrong needle. Needle bent. Machine threaded improperly. Needle too fine or too thick for the thread. Remedy: Push needle up as far as it will go and be sure that the long groove faces toward you, and flat side of shank away from you. The correct needle system is stamped on needle plate. (For ordinary sewing, use System 130R needles.) Insert new needle. Check and correct threading as instructed on pages 14 and 15. Use correct needle and thread. 2. Needle Thread Breaks Cause: The above mentioned may cause thread breakage. Thread tension too tight. Poor or knotty thread used. Remedy: See remedies listed under 1. above. Adjust tensions as instructed. Use good quality threads only. 29