Pfaff 360 Owner's Manual - Page 49

R6115 R 5913 R 5924 Tubular Articles Thin Spots Small Holes Machine Setting A -0 B- 4 Drop feed. You need no darning hoop to mend sleeves. trouser legs or socks on your PFAFF 360. Simply slip them over the free arm. Stitch back and forth across the hole, first length wise, then crosswise. Use a thin No. 70 needle. Remember that "a stitch in time saves nine" and reinforce spots that have worn thin with short stitches made lengthwise and across worn section. Clamp fabric into darning hoop and move it freely under the needle. Long rips may be darned with the normal sewing foot and without hoop. Raise ma chine feed and use forward-reverse stitch control. Darn small and medium-size holes by trimming ragged edges with the fabric grain. First stitch back and forth across the hale from one side to the other with the machine running at high speed. Then turn the fabric at right angles and sew back and forth over preceding work with short stitches. This anchors threads in the unworn area around the hole. 48