Pfaff 360 Owner's Manual - Page 46
Pfaff 360 Manual
View all Pfaff 360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
p 0 0 Instructions for Buttonholing I Sew first side over a filler cord. When beginning of seam reaches slide indicator on buttonhole gauge, it is the right length. Leave needle in fabric on right side of its throw. 2 Lift foot, turn fabric around clockwise, using needle as a pivot. Lower foot, take one stitch to the left, pull filler cord taut and lay ii parallel to completed line of stitch ing. 3 Press lever F down. Make 4 to 6 bortack stitches, slight ly closing together buttonhole end to reduce length of bar. 4 Release lever F. Trim filler cord at end of first stitch row. Sew second row and stop about 4 to 6 stitches from end of first row. 5 Press lever F down. Make second tack, as instructed above. 6 Push lever F up and make 3 to 4 tying stitches. 7 Trim both the sewing and filler threads. Open the buttonhole with your seam ripper. Be careful not to injure the bartacks. 45