Pfaff 360 Owner's Manual - Page 32
filled.> - belt
View all Pfaff 360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
5. Machine Feeds Improperly Cause: Feed dog set too low, does not rise up enough obove needle plate level. Accumulations of lint pocked between feed teeth. Remedy: Hove your Pfoff dealer make the necessary adjustment. Take off needle plate and remove lint with a stiff brush. 6. Machine Works Heavily Cause: Motor belt has shrunk and causes excessive pressure on bearings. Hook raceway lacks oil or is obstructed by pieces of thread. Mechanism clogged by inferior oil. Bobbin winder working while sewing (when a bobbin is not being filled.> Remedy: Loosen motor belt by adjusting idler (see page 28). Clean and oil hook raceway. Use only Pfaff sewing machine oil - never salad oil or glycerine. Stop bobbin winder. Thread Jamming The new PFAFF rotary hook will not normally If thread should happen to come hard working of the jam in the raceway mechanisiii. Thread jamming can be avoided, however, by Earn, even if the machine should be of the sewing hook, the power of the following the instructions on page 5. handled improperly. motor will be sufficient to over 31