Pfaff creative 1371 Owner's Manual - Page 38
§mportant
View all Pfaff creative 1371 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
4 Changing the fuse Pull out the mains plug. Turn fuse holder A left a quarter turn with a screwdriver, release it and take it out. Pull out fuse B. Insert a new fuse n the holder, re place the holder, push it in with the screwdriver, then turn it right a quarter turn. (The fuse type is F2A.) 110-volt machines have no fuse. ) §mportant When the machine is switched on by pushing the master switch the sewing light goes on. When the machine is switched off by pushing the master switch, pulling out the mains plug or by power failure the program memory in the computer is retained by batteries. When the machine is switched on again program 00 (straight stitching with the needle in its central position) appears in the display. Program combinations remain memorized. If a program is entered during sewing, this will not become effective until the machine has stopped and the foot control is pressed again. Stitch length and stitch width can be chang ed during sewing. For bobbin winding disengage the sewing mechanism. Make sure you re-engage the sewing mechanism after you have finished winding. The electronic components in the machine will warm up during operation. This is quite normal and has no negative implications. 32