Pfaff hobby serger Owner's Manual - Page 11
TURNING, SQUARE, CORNER, Outside, Corner
View all Pfaff hobby serger manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
__ START TO SEW needle clamp body Note: edge guide is preset to limit stitch width to approximately 11/64 inch (4.2mm). SECURING TAIL CHAINS • Place needle clamp body to lowest position. • Apply liquid fray preventer. • Place thread chain 9O to needle. • Use large needle and thread chains under stitches. • Place fabric under presser foot touching needle and against seam guide. TURNING SQUARE CORNER • Select High or Low sewing speed. • Stan stitching. \ • Lightly guide fabric. • When seam is complete continue sewing, forming thread tail for next sewing. -9---- Outside Corner - • Sew to point A, one stitch past end of corner.
START
TO
SEW
_________________
SECURING
TAIL
CHAINS
Note:
edge
guide
is
preset
to
limit
stitch
needle
clamp
width
to
approximately
11/64
inch
(4.2mm).
body
•
Place needle
clamp
body
to
lowest
•
Apply
liquid
fray
preventer.
position.
•
Place
thread
chain
9O
to
needle.
•
Use
large
needle
and
thread
chains
•
Place
fabric
under
presser
foot
touching
under
stitches.
needle
and
against
seam
guide.
TURNING
SQUARE
CORNER
•
Select
High
or
Low
sewing
speed.
•
Stan
stitching.
\
Outside
Corner
—
corner.
•
When
seam
is
complete
continue
•
Lightly
guide
fabric.
•
Sew
to
point
A,
one
stitch
past
end
of
sewing,
forming
thread
tail
for
next
sewing.
—9----