Pfaff hobby serger Owner's Manual - Page 9
ZYf&I
View all Pfaff hobby serger manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
THREADING PATH B (UPPER LOOPER) STEP 2 Bi iL 2ZYf&I B • Draw thread of spool (B) through guide (B-i). • Pull thread down to guide (B-2). fID iII • Use tweezers to place thread into two discs. needle clamp body • Turn handwheel toward Lower needle clamp body to lowest position. This is optimum position for threading guide (B-3). -7- Di /T • Guide thread down through rear guide (B-3). needle clamp body Place needle clamp body to highest position. This is optimum position for threading upper looper. • Insert threader into right side hole (B-4). • Guide thread through threader. • Pull threader towards you threading looper from back to front. • Guide thread through left side hole (B-5). • Draw thread to left.
Di
/T
needle
clamp
body
THREADING
PATH
B
(UPPER
LOOPER)
STEP
2
Bi
iL
2ZYf&I
B
•
Draw
thread
of
spool
(B)
through
guide
(B-i).
•
Pull
thread
down
to
guide
(B-2).
•
Use
tweezers
to
place
thread
into
two
discs.
•
Turn
handwheel
toward
Lower
needle
clamp
body
to
lowest
position.
This
is
optimum
position
for
threading
guide
(B-3).
fID
iII
needle
clamp
body
•
Guide
thread
down
through
rear
guide
(B-3).
Place
needle
clamp
body
to
highest
position.
This
is
optimum
position
for
threading
upper
looper.
•
Insert
threader
into
right
side
hole
(B-4).
•
Guide
thread
through
threader.
•
Pull
threader
towards
you
threading
looper
from
back
to
front.
•
Guide
thread
through
left
side
hole
(B-5).
•
Draw
thread
to
left.
—7—