Pfaff hobbylock 4764 Owner's Manual - Page 12

3. Right needle threading (C) For easy threading, disengage the moveable blade by turning it upwards. Push the upper blade holder screw (A) with the forefinger of your left hand and turn the right end of the holder (B) with your right fingers in the direction of arrow (Fig. C). Take the thread drawn from spool, and pass it through thread guides (1)-(7) (Fig. A). Then thread the eye of right needle (8) from front to back using tweezers. Cut the thread leaving about 10 cm (4") of thread tail. 4. Left needle threading (D) Take the thread drawn from spool, and pass it through thread guides (1)-(7), and thread the eye of left needle (8) from front to back (Fig. A, C). Return the moveable blade to the cutting position. Make sure the blade is returned to the cutting position before start sewing. Otherwise, it may cause some serious damage to your machine. 2-2 Changing thread The following is an easy way to change threads; 1. Cut the thread in use near the spool (behind the telescopic thread stand). Place the new thread on the spindle and tie it to the end of the original thread. A B Fig. C As the upper blade is sharp, handle the moving part with care. 10