Pfaff hobbylock 4764 Owner's Manual - Page 19

Stitch width adjustment, Stitch length adjustment

Page 19 highlights

Stitch width adjustment Adjust the stitch width from 4.2 mm to 6.2 mm according to the kind of fabric. Typically, wider stitch widths are used for heavier fabrics. The standard width is 4.5 mm. Open the side cover to adjust the width. • To increase the stitch width, turn the stitch width adjustment dial to a larger number. • To decrease the stitch width, turn the stitch width adjustment dial to a smaller number. This figure shows that the stitch width between the left needle and the edge of the fabric is 4.5 mm. Stitch length adjustment The machine is pre-set to 2.5 mm stitch length for regular seaming and overlock. You may adjust the stitch length from 1 mm (narrow rolled hemming) to 5 mm by adjusting the stitch length adjustment lever. For normal overlock, set the stitch length from 2.5 mm to 4.4 mm. A stitch length less than 2.5 mm is used only for rolled hemming. Adjust the stitch length according to the fabrics and threads (see table on p. 20). 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

17
Stitch width adjustment
Adjust the stitch width from 4.2 mm to
6.2 mm according to the kind of fabric.
Typically, wider stitch widths are used for
heavier fabrics.
The standard width is 4.5 mm.
Open the side cover to adjust the width.
• To increase the stitch width, turn the stitch
width adjustment dial to a larger number.
• To decrease the stitch width, turn the stitch
width adjustment dial to a smaller number.
This figure shows that the stitch width
between the left needle and the edge of the
fabric is 4.5 mm.
Stitch length adjustment
The machine is pre-set to 2.5 mm stitch
length for regular seaming and overlock. You
may adjust the stitch length from 1 mm
(narrow rolled hemming) to 5 mm by
adjusting the stitch length adjustment lever.
For normal overlock, set the stitch length
from 2.5 mm to 4.4 mm. A stitch length
less than 2.5 mm is used only for rolled
hemming.
Adjust the stitch length according to the
fabrics and threads (see table on p. 20).