Pfaff performance 2054 Owner's Manual - Page 118
Changing, needle, plate, Removal, Replacing, Cleaning
View all Pfaff performance 2054 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Changing the needle plate Switch off the main switch Removal • Raise the presser foot. Position the needle plate changer (lamp changer) as shown and press the needle plate up on the right, then on the left. It can now be easily removed. Replacing • Place the needle plate against the rear edge of the cut-out then \\ press down at the front until you hear it snap in place. Before you start sewing, check that the needle plate is lying flat. Tip: Lower the feed dog to make removing the needle plate easier. Cleaning • Switch off the main switch • Remove the needle plate and lower the feed dog. Clean the feed dog and hook area with the brush. • Clean the sewing machine every 10 - 1 5 hours of operation. Cleaning the display Wipe the display with a soft, lint-free dry cloth. DO NOT use aggressive cleansers or solvents! 116