Pfaff performance 2054 Owner's Manual - Page 59
directions
View all Pfaff performance 2054 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Straight stitch - No 1 Stitch 115 the basic straight stitch in center needle position. The stitch length can be increased up to 6 mm. Change the needle position of the straight stitch to sew in a zipper or topstitch along the edge of a collar. Your Pfaff performance 2054 has 19 needle positions that can be adjusted with the . icon and button. Tip: Use the "needle up / down" button to easily pivot at collar points. Sewing in zippers - No I There are different ways to sew in zippers. Follow the directions included with your pattern for best results. For all types of zippers it is important to sew close to the teeth of the zipper. The zipper foot can be snapped to the presser foot ankle on the left or right, depending on how you will insert your zipper. Then set the needle position so that it enters close to the edge of the zipper teeth by using one of the 19 needle positions available. Note: If the presser foot is attached on the right side, the needle must be moved to the right. If the foot is attached on the left the needle must be moved to the left. 58