Pfaff powerquilter p3 Manual - Page 28

Calibrating the Screen

Get Pfaff powerquilter p3 PDF manuals and user guides View all Pfaff powerquilter p3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Calibrating the Screen If your screen needs to be calibrated because when you touch it nothing happens take the following steps. 1. Place the USB stick into your computer. 2. Go to www.pfaff.com. 3. Select Quilting, PowerQuilterTM p3. 4. On the right side menu select "Calibrating Your Screen" 5. Download file reset.cal to the USB stick. 6. Safely remove the USB stick from your computer after the file has downloaded. 7. Power on the quilting machine. 8. Plug the USB stick into the USB port located on the left side of the LCD screen (fig. 51). 9. The quilting machine will begin to read the file and it will start the calibration. 10. Follow the instructions on your screen to calibrate your screen. 11. The quilting machine will restart, once the machine has booted back up the screen will be calibrated. 12. Once the calibration is complete the file reset.cal will automatically be removed from the USB stick. Fig. 51 USB Port 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
28
Calibrating the Screen
If your screen needs to be calibrated because when you touch it nothing happens take the following
steps.
1. Place the USB stick into your computer.
2. Go to
www.pfaff.com
.
3. Select Quilting, PowerQuilter
TM
p3.
4. On the right side menu select “Calibrating Your Screen”
5. Download file reset.cal to the USB stick.
6. Safely remove the USB stick from your computer after the file has downloaded.
7. Power on the quilting machine.
8.
Plug the USB stick into the USB port located on the left side of the LCD screen (fig. 51).
9.
The quilting machine will begin to read the file and it will start the calibration.
10. Follow the instructions on your screen to calibrate your screen.
11. The quilting machine will restart, once the machine has booted
back up the screen will be calibrated.
12. Once the calibration is complete the file reset.cal will
automatically be removed from the USB stick.
Fig. 51
USB Port