Philips DFR150017 User manual - Page 16

English Tuner Manual tuning 1 Press TUNER to select tuner mode. 4 Press ( / ) (or numeric keys 0-9 on the remote control) to select the desired preset channel number to store. 5 Press PRESETS again to store the radio station. ➜ After 2 seconds, the display will show the current waveband and frequency. 2 To switch between FM and MW waveband, press TUNER again. 3 Press FREQUENCY 4 or 3 (or à / á on the remote control) repeatedly to change the frequency. The frequency changes in 50kHz steps in FM and 9kHz steps in MW waveband. Automatic tuning 1 Press TUNER to select tuner mode. 2 To switch between FM and MW waveband, press TUNER again. 3 Press and hold FREQUENCY 4 or 3 for more than one second to activate auto tuning mode. ➜ When a station is reached, auto tuning stops. q Repeat steps 2-3 to search for other radio stations. Tuning to a weak FM station 1 Press FREQUENCY 4 or 3 repeatedly to tune in the weak FM station manually. 2 Press FM MODE (Ç) to switch to mono mode. This should reduce the noise and make the station easier to hear. Preset Radio Stations When a preset station is selected, the preset number will appear shortly and the display will show the waveband and frequency. Storing Preset Radio Stations You can store up to 20 stations in the FM waveband and 20 stations in the MW waveband in the memory. 1 In tuner mode, press TUNER to switch between FM and MW waveband. 2 Press FREQUENCY 4 or 3 to tune in the desired station. 3 Press and hold PRESETS until "PRESET" icon flashes. q Repeat steps 2-5 to store other preset radio stations. Selecting Preset Radio Stations 1 In tuner mode, press TUNER to switch between FM and MW waveband. 2 Press PRESETS and followed by FREQUENCY 4 or 3 (or ( / ) on the remote control) to select the desired preset station. q You can also use the remote control's direct access numeric keys. RDS IMPORTANT! RDS functions are only available in areas that use the RDS system. RDS (Radio Data System) is a broadcasting service that allows FM stations to send additional information along with the regular FM radio signal. This additional information can contain the following : - Station Name - Radio Text - Programme Type - Frequency Displaying RDS data When an RDS radio station is received, the RDS icon ( Ç ) and station name (if available) will appear on the display. While receiving an RDS radio station, you can change the display information by pressing RDS DISPLAY on the remote control repeatedly. Note: - If the tuned station is not transmitting an RDS signal or not an RDS station, "NO PS" will be displayed. 16 TUNER