Philips DFR150017 User manual - Page 9

English Rear Panel Connections 12 3 45 09 8 7 IMPORTANT! - Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. - Never make or change any connections with the power switched on. - The type plate is located at the rear of the system. 1 ANTENNA FM Antenna For FM reception, connect the FM antenna to the FM terminal. Move the antenna in various directions until the clearest signal is received. AM Loop Antenna For AM reception, connect the AM loop antenna to the AM terminal. Position the loop antenna to receive the clearest sound. 1 2 q Fully insert the stripped portion of the antenna into the terminals as shown. Note: - Position the antenna as far as possible from a TV,VCR or other radiation source. 6 2 AUDIO IN For connecting analogue (Left/Right) audio signals from external sources to the unit. VCR - connect to Video Cassette Recorder AUDIO OUT terminal TV - connect to Television AUDIO OUT terminal CDR - connect to CD Recorder AUDIO OUT terminal 3 VIDEO IN For connecting to the corresponding VIDEO OUT terminal on a VCR, TV or CDR. 4 DIGITAL OUT (in DVD/CD mode only) Digital Coaxial Output RCA terminal For connecting to external equipment that has a digital COAXIAL IN terminal. Digital Optical Output terminal For connecting to external equipment that has a digital OPTICAL IN terminal. 5 SCART OUT For connecting to the SCART IN terminal on the TV using the supplied scart cable. Audio Out on/off switch For switching on or off the audio signal from the AV CONNECTOR to your TV. 6 VIDEO OUT For connecting to external equipment with VIDEO IN terminals for viewing or recording. REC - connect to VCR or other recording device MON- connect to TV or Monitor CONNECTIONS 9